Dynamic intelligent autonomous control of an asteroid lander

Abstract

The Strathprints institutional repository (https://strathprints.strath.ac.uk) is a digital archive of University of Strathclyde research outputs. It has been developed to disseminate open access research outputs, expose data about those outputs, and enable the management and persistent access to Strathclyde's intellectual output. Abstract: One of the future flagship missions of the European Space Agency (ESA) is the asteroid sample return mission Marco-Polo. Although there have been a number of past missions to asteroids, a sample has never been successfully returned. The return of asteroid regolith to the Earth's surface introduces new technical challenges. This paper develops attitude control algorithms for the descent phase onto an asteroid in micro-gravity conditions and draws a comparison between the algorithms considered. Two studies are also performed regarding the Fault Detection Isolation and Recovery (FDIR) of the control laws considered. The potential of using Direct Adaptive Control (DAC) as a controller for the surface sampling process is also investigated. Use of a DAC controller incorporates increased levels of robustness by allowing realtime variation of control gains. This leads to better response to uncertainties encountered during missions.

Lunar Excursion Module Landing Control System Design with P, PI and PID Controllers

“…For the safe and comfortable landing of the LEM's human pilots, the system parameters must be selected as given in Table 1 (Brown et al, 2010;Bilimoria, 2009;Stengel, 1993;Klumpp, 1974). Natural Frequency ωn 0.5…”

Innovative hazard detection and avoidance guidance for safe lunar landing

“…2 NASA Autonomous precision Landing and Hazard Avoidance Technology (ALHAT) Project put forward new requirements that the newly-developing AHDA for future planetary landing missions must be competent to any lighting conditions (no matter glaring, cloudy, or murk). [3][4][5] Because the gray image from passive optical sensor is susceptible to lighting conditions, missing or false hazard detection usually happens. On the contrary, active sensor directly acquires the three-dimensional digital elevation map (DEM) of landing area as well as lander's position with respect to terrain by active laser scanning, thus is more robust to environmental changes.…”