Durability and Time-Dependent Properties of Low-Cement Concrete

Abstract

The sustainability concerns of concrete construction are focused both on the materials’ eco-efficiency and on the structures’ durability. The present work focuses on the characterization of low cement concrete (LCC), regarding time-dependent and durability properties. LCC studies which explore the influence of the formulation parameters, such as the W/C (water/cement ratio), W/Ceq, (which represents the mass ratio between water and equivalent cement), W/B (water/binder) ratio, and the reference curves, on the aforementioned properties are limited. Thus, several LCC mixtures were formulated considering two dosages of binder powder, 350 and 250 kg/m3, the former with very plastic consistency and the latter with dry consistency, which were combined with a large spectrum of cement replacement rates (up to 70%), through adding fly ash and limestone filler, and with different compactness levels. The main objectives were to study the influence of the formulation parameters on the properties: shrinkage and creep, accelerated carbonation and water absorption, by capillarity, and by immersion. The lifetime of structures produced with the studied LCC was estimated, considering the durability performance, regarding the carbonation effect on the possible corrosion of the steel reinforcement. LCC mixtures with reduced cement dosage and high compactness, despite the high W/C ratios, have low shrinkage and those with higher strength have reduced creep, however depending on W/Ceq ratio. Those mixtures can be formulated and produced presenting good performance regarding carbonation resistance and, consequently, a long lifetime, which is mandatory for a sustainable construction. LCC with 175 kg/m3 of cement dosage is an example with higher lifetime than current concrete with 250 kg/m3 of cement; depending on the XC exposure classes (corrosion induced by carbonation), the amount of cement can be reduced between 37.5% and 42%, since the LCC with 175 kg/m3 of cement allows reducing the concrete cover below the minimum recommended, ensuring simultaneously the required lifetime for current and special structures.

An Experimental Assessment of the Water Permeability of Concrete with a Superplasticizer and Admixtures

“…Concrete is one of the major construction materials widely used for infrastructure and building construction across the world. The durability of concrete structures is primarily influenced by the movement of both gaseous and liquid substances via the system of pores, which can possibly result in the deterioration of the quality of concrete [ 1 , 2 , 3 ]. The ability of concrete to withstand the intrusion of these aggressive agents is mainly characterized by permeability.…”

Studies of Fracture Toughness in Concretes Containing Fly Ash and Silica Fume in the First 28 Days of Curing

“…However, the size of FA particles was also fine grading with well-developed surfaces ( Figure 1 ). The small particle size of the SF and FA have a beneficial effect on the parameters of strength and fracture mechanics as well as physical parameters of concretes with these additives, e.g., [ 83 , 84 , 85 ].…”

Low-Cement Dosage Refractory Concrete With Low Thermal Conductivity

“…Researching the durability of concrete with low dosages of cement was the concern of Robalo et al (2020) [6]. Two dosages of cement were used, one of 350 kg•m -3 with high plastic consistency and the other of 250 kg•m -3 with dry consistency, combined with the addition of fly ash and limestone filler.…”