Duncan–Chang E-υ Model Considering the Thixotropy of Clay in the Zhanjiang Formation

Abstract

The clays of the Zhanjiang Formation in the coastal area of Beibu Gulf of China are thixotropic, and the existing constitutive relationship models relevant for clay are incapable of accurately simulating their stress–strain relationships. It is vital to study the changes of mechanical properties of Zhanjiang Formation clay that occur during thixotropy, and to establish a constitutive model considering thixotropy. The varying measures of its shear strength, cohesion, internal friction angle, and initial tangential modulus during thixotropy were investigated by means of triaxial consolidation and drainage tests. Furthermore, the quantitative relationships between the clay’s cohesion, internal friction angle, and initial tangential modulus of the clay and time were examined. This relationship was introduced into the Duncan–Chang model, and a Duncan–Chang model considering the thixotropy of clay was developed. The established model was used to make predictions to assume the validation of the experimental data, and numerical simulations were then carried out. All of the results from the model’s prediction, numerical simulation and experimental measurements were compared against each other in order to verify the reasonableness of the model we had utilized. The results positively demonstrated that: (1) the shear strength, cohesion, angle of internal friction, and initial tangent modulus of the clay gradually increases with longer curing times, and eventually it will stabilize; and (2) compared with the Duncan–Chang model not considering thixotropy, the established thixotropic model is better able to reflect the influence of clay thixotropy on the clay stress–strain relationship, as its mean relative error is smaller. The results of this study provide references for calculating strength and deformation of the clay thixotropy. Further, it also provides references for bearing load calculations of pile foundations in thixotropic clay strata when subjected to long-term loading conditions.

Undrained Shear Properties of Shallow Clayey-Silty Sediments in the Shenhu Area of South China Sea

“…Therefore, it is inferred that the clayey-silty sediments of SCS under OC conditions exhibit more dilative deformation during shearing than expected. Since the deformation response of sediments is related to its initial state [9], the OC specimens seem to undergo hardening due to secondary consolidation or thixotropy [8,45]. For example, the volume of the specimen with OCR = 2 is unexpectedly below the CSL as shown in Figure 3.…”