Droplet Distribution in a University Dental Clinic Setting: The Importance of High-Volume Evacuation

Abstract

The purpose of this study is to compare droplet distribution during a piezoelectric ultrasonic debridement procedure using either high-volume or slow-volume evacuation. Droplet distribution during a crown preparation with slow-volume evacuation is also examined. Fluorescein dye is added to the water reservoir and the procedures are performed by a single operator for 15 min on a dental manikin with artificial upper and lower teeth. Placement of filter paper squares (10 cm × 10 cm) in radiating lines away from the oral cavity of the dental manikin allows for visualization of droplet dispersion. Results show minimal difference in the spread of the droplets between the two evacuators during the debridement procedure; however, the slow-volume evacuator produces a higher concentration of droplets than the high-volume evacuator. An even higher concentration of droplets in the vicinity of the dental chair is observed during the crown preparation procedure. This study recommends the use of a high-volume evacuator where possible during professional debridement and crown preparation to reduce contamination around the dental chair from potentially pathogenic microorganisms.

Visualization of droplets and aerosols in simulated dental treatments to clarify the effectiveness of oral suction devices

“…Therefore, the suction opening should be composed of transparent material that does not interfere with vision. Gualtieri et al highlighted the importance of suction strength [44]. The optimal EOS shape, material, and suction strength must be identified.…”