Does Colloid Shape Affect Detachment of Colloids by a Moving Air–Water Interface?

Abstract

Air-water interfaces interact strongly with colloidal particles by capillary forces. The magnitude of the interaction force depends on, among other things, the particle shape. Here, we investigate the effects of particle shape on colloid detachment by a moving air-water interface. We used hydrophilic polystyrene colloids with four different shapes (spheres, barrels, rods, and oblong disks), but otherwise identical surface properties. The nonspherical shapes were created by stretching spherical microspheres on a film of polyvinyl alcohol (PVA). The colloids were then deposited onto the inner surface of a glass channel. An air bubble was introduced into the channel and passed through, thereby generating a receding followed by an advancing air-water interface. The detachment of colloids by the air-water interfaces was visualized with a confocal microscope, quantified by image analysis, and analyzed statistically to determine significant differences. For all colloid shapes, the advancing air-water interface caused pronounced colloid detachment (>63%), whereas the receding interface was ineffective in colloid detachment (<1.5%). Among the different colloid shapes, the barrels were most readily removed (94%) by the advancing interface, followed by the spheres and oblong disks (80%) and the rods (63%). Colloid detachment was significantly affected by colloid shape. The presence of an edge, as it occurs in a barrel-shaped colloid, promoted colloid detachment because the air-water interface is being pinned at the edge of the colloid. This suggests that the magnitude of colloid mobilization and transport in porous media is underestimated for edged particles and overestimated for rodlike particles when a sphere is used as a model colloid.

On-chip purification via liquid immersion of arc-discharge synthesized multiwalled carbon nanotubes

“…A comparable situation has been studied, and the effect verified, with ellipsoidal polystyrene colloidal particles in Ref. [24], though with a much smaller aspect ratio than with MWNTs. The orientation effect is also in accordance with our previous study [9].…”

Shape affects the interactions of nanoparticles with pulmonary surfactant

“…5a. The differences of the structural disruptions to the DPPC monolayer by NPs of various shapes together with their trans-membrane dynamics can be ascribed to two points: (1) Particle shape influences the capillary forces acting on particles at the air-water interface, which is important for NP dynamics [23,24]. (2) Particle shape affects the rotation and orientation abilities of NPs on the membrane [25,26,29].…”

Mobilization of Microspheres from a Fractured Soil during Intermittent Infiltration Events

“…We showed that intermittent rainfall can mobilize microspheres, and the mobilization could be particularly high in soil with greater permeability because of the presence of macropores. However, the transport and mobilization of actual pathogens can vary from that of microspheres (Harvey et al, 1989), possibly due to differences in contact points (Harvey et al, 2011), shape (Aramrak et al, 2013), density (Zvikelsky et al, 2008), and surface properties (Weisbrod et al, 2013). Furthermore, pathogens could lose their virulence and, perhaps, their viability during desiccation; both factors could either decrease or increase the mobilization of viable, infectious pathogens.…”