Disposable Sensors in Diagnostics, Food, and Environmental Monitoring

Abstract

Disposable sensors are low‐cost and easy‐to‐use sensing devices intended for short‐term or rapid single‐point measurements. The growing demand for fast, accessible, and reliable information in a vastly connected world makes disposable sensors increasingly important. The areas of application for such devices are numerous, ranging from pharmaceutical, agricultural, environmental, forensic, and food sciences to wearables and clinical diagnostics, especially in resource‐limited settings. The capabilities of disposable sensors can extend beyond measuring traditional physical quantities (for example, temperature or pressure); they can provide critical chemical and biological information (chemo‐ and biosensors) that can be digitized and made available to users and centralized/decentralized facilities for data storage, remotely. These features could pave the way for new classes of low‐cost systems for health, food, and environmental monitoring that can democratize sensing across the globe. Here, a brief insight into the materials and basics of sensors (methods of transduction, molecular recognition, and amplification) is provided followed by a comprehensive and critical overview of the disposable sensors currently used for medical diagnostics, food, and environmental analysis. Finally, views on how the field of disposable sensing devices will continue its evolution are discussed, including the future trends, challenges, and opportunities.

CRISPR/Cas13a‐Powered Electrochemical Microfluidic Biosensor for Nucleic Acid Amplification‐Free miRNA Diagnostics

“…However, these approaches still need error‐prone amplification steps prior to the miRNA detection, have rather tedious preparation steps, or are limited by the design of suitable primers . To address these issues, we combine microfluidics with an electrochemical signal readout to develop a sensitive (i.e., target amplification‐free) and selective diagnostic test, while enabling a miniaturization for POC testing . We further apply the newly discovered CRISPR/Cas13a technology, which is able of targeting almost any RNA, to our developed electrochemical biosensor, creating a novel and powerful tool for miRNA diagnostics ( Figure a).…”

Robust High‐Capacitance Polymer Gate Dielectrics for Stable Low‐Voltage Organic Field‐Effect Transistor Sensors

“…Portable and wearable low‐power consumption chemical sensors that generate rapid and reliable quantitative information, particularly in resource‐limited settings, are in tremendous demand for application in areas such as medical diagnostics, food and environmental monitoring 1. Sensors based on organic field‐effect transistors (OFETs) are attractive candidates due to the intrinsic advantages of low‐power consumption, light weight, substrate flexibility (e.g., paper or plastic) and direct electrical transduction of the analyte response 2.…”

“…They deliver reliable sensing performance over multiple cycles of ammonia exposure (2 to 50 ppm) with an estimated limit-of-detection below 1 ppm.Portable and wearable low-power consumption chemical sensors that generate rapid and reliable quantitative information, particularly in resource-limited settings, are in tremendous demand for application in areas such as medical diagnostics, food and environmental monitoring. [1] Sensors based on…”

Enhanced Protein Immobilization on Polymers—A Plasma Surface Activation Study

“…POCT systems not only have to deliver a high performance (regarding sensitivity, selectivity and turnaround times), but they also should be cost-effective without the need for bulky instrumentation (for example, for sample preparation or signal readout). In order to produce low-cost on-site testing cost on-site testing systems in high throughput, the employed materials have shifted over the last years from silicon, glass or ceramics, used mainly for micro-and nanoelectromechanical systems, to polymers [4]. In contrast to these advanced materials, mainly requiring expensive and timeconsuming fabrication processes, polymers offer a facile and cost-effective mass production of sensors.…”