Abstract:This paper presents the ‘load-transfer functions’ t-z and p-y methods for determining the axial and lateral displacements of single piles. They are based on the results of pressuremeter tests. The methods from the results of the Ménard pre-borehole pressuremeter tests (MPM) and the self-boring pressuremeter tests (PAF, for Pressiomètre AutoForeur in French) are described. Especially, the t-z and p-y methods derived from the MPM test results are commonly used in the French practice. For both t-z and p-y curves,… Show more
“…In the proposed initial model, the initial shear stiffness is proportional to the Menard modulus (E M ) and inversely proportional to pile radius (r). However, the proposed model does not consider the type of pile and considers only two types of soil, namely cohesive soils and granular soils [17].…”
Section: Hyperbolic Model For Far-pile Soilmentioning
The existing model for calculating the settlements of group piles is based on the principle of superposition, which fails to calculate the interaction between piles more comprehensively and to take into consideration the influence of slip between pile and soil. In this paper, the interaction between group piles is analyzed from a novel perspective. It is assumed that the interaction between piles is a dynamic equilibrium process, i.e., additional shear forces and additional displacements are continuously transferred between piles until a state of equilibrium is reached. On this basis, we propose a new model for calculating the settlements of group piles considering pile–soil slip. First, a calculation method for pile–side resistance is developed considering the influence of slip. Based on experience with the pile–soil interface, pile–side soils can be categorized as near–pile soil and far–pile soil, and different load–transfer models are applied to describe their mechanical states. By equating pile–side soils into a nonlinear spring and connecting them in series to determine the overall equivalent stiffness considering the effect of pile–soil slip, the pile–side resistance under different loading conditions can be accurately determined. Secondly, equilibrium analysis of the pile unit is carried out when the equilibrium condition is reached, and the stiffness matrix for load transfer is derived. Therefore, in this paper, the interaction between piles is concentrated in this matrix, which makes the proposed model for pile settlement calculation clearer and more concise. Compared with measured data, the proposed method can capture the main features of the load–settlement behavior of group piles.
“…In the proposed initial model, the initial shear stiffness is proportional to the Menard modulus (E M ) and inversely proportional to pile radius (r). However, the proposed model does not consider the type of pile and considers only two types of soil, namely cohesive soils and granular soils [17].…”
Section: Hyperbolic Model For Far-pile Soilmentioning
The existing model for calculating the settlements of group piles is based on the principle of superposition, which fails to calculate the interaction between piles more comprehensively and to take into consideration the influence of slip between pile and soil. In this paper, the interaction between group piles is analyzed from a novel perspective. It is assumed that the interaction between piles is a dynamic equilibrium process, i.e., additional shear forces and additional displacements are continuously transferred between piles until a state of equilibrium is reached. On this basis, we propose a new model for calculating the settlements of group piles considering pile–soil slip. First, a calculation method for pile–side resistance is developed considering the influence of slip. Based on experience with the pile–soil interface, pile–side soils can be categorized as near–pile soil and far–pile soil, and different load–transfer models are applied to describe their mechanical states. By equating pile–side soils into a nonlinear spring and connecting them in series to determine the overall equivalent stiffness considering the effect of pile–soil slip, the pile–side resistance under different loading conditions can be accurately determined. Secondly, equilibrium analysis of the pile unit is carried out when the equilibrium condition is reached, and the stiffness matrix for load transfer is derived. Therefore, in this paper, the interaction between piles is concentrated in this matrix, which makes the proposed model for pile settlement calculation clearer and more concise. Compared with measured data, the proposed method can capture the main features of the load–settlement behavior of group piles.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.