Discrete Fracture Network (DFN) as an Effective Tool to Study the Scale Effects of Rock Quality Designation Measurements

Abstract

Rock quality designation (RQD) is a parameter that describes rock mass quality in terms of percentage recovery of core pieces greater than 10 cm. The RQD represents a basic element of several classification systems. This paper studies scale effects for RQD measurements using synthetic rock masses generated using discrete fracture network (DFN) models. RQD measurements are performed for rock masses with varying fracture intensities and by changing the orientation of the simulated boreholes to account for orientation bias. The objective is to demonstrate the existence of a representative elementary length (REL, 1D analogue of a 3D representative elementary volume, or REV) above which RQD measurements would represent an average indicator of rock mass quality. For the synthetic rock masses, RQD measurements were calculated using the relationship proposed by Priest and Hudson and compared to the simulated RQD measurements along the boreholes. DFN models generated for a room-and-pillar mine using mapped field data were then used as an initial validation, and the conclusion of the study was further validated using the RQD calculation results directly obtained from the depth data collected at an iron cap deposit. The relationship between rock mass scale and assumed threshold length used to calculate RQD is also studied.