Disconnectable Mooring Systems for Arctic Conditions

Abstract

This paper reviews the issues associated with mooring a ship shaped Floating Production Unit (FPU) in arctic conditions, and presents the development of a novel disconnection and reconnection system for such conditions. The mooring systems of FPUs operating in arctic conditions must be disconnectable to allow the FPU to leave the station to avoid collision with icebergs, or to avoid overloading the mooring legs due to sea ice acting on the FPU hull. In the case of sea ice, the FPU may be required to disconnect under much higher loads than the non-arctic disconnectable systems in operation today. A recent study for the design of an arctic mooring system identified a number of key developments that are required before such systems could be deployed. The disconnection system is a safety critical element, and requires high reliability and redundancy to ensure the FPU can always rapidly disconnect from its mooring when required. In addition, the large number of risers that may be installed for these large field developments, combined with the significant suspended weight resulting from the high capacity mooring system, leads to large buoyancy requirement for the buoy which must support the risers and mooring system when disconnected from the vessel. As a consequence the analysis of the reconnection process must account for the coupled behaviour of the large buoy body, the mooring system, and the risers and umbilicals. Such analysis has shown that using conventional disconnectable turret technology, the large buoy size coupled with the requirement to reconnect in heavy sea states, can readily generate snatch loads that would break the pull-in winch wire. In response to the above, this paper presents two significant advances in disconnectable mooring technology. The first is the development of a new locking system to connect the buoy to the turret, which has been qualified at full scale. The second concerns the design of a new pull-in arrangement that eliminates the risk of snatch loads even in sea states in excess of 3m Hs. The system robustness has been demonstrated through model testing.

Overview of Measures Specifically Designed to Prevent Oil Pollution in the Arctic Marine Environment from Offshore Petroleum Activities

“…The operational procedures and potential downtime in case of disconnection are finally discussed.  Disconnectable mooring systems for Arctic conditions: SBM Offshore is developing a new disconnection and reconnection system for a ship-shaped floating production unit (FPU) in Arctic conditions (Bauduin et al, 2015). Bauduin et al (2015) review the requirements to and challenges of disconnection and reconnection systems.…”

“… Disconnectable mooring systems for Arctic conditions: SBM Offshore is developing a new disconnection and reconnection system for a ship-shaped floating production unit (FPU) in Arctic conditions (Bauduin et al, 2015). Bauduin et al (2015) review the requirements to and challenges of disconnection and reconnection systems. Furthermore, the development of SBM Offshore's new disconnection and reconnection system is presented.…”