Direct tilt angle control on inverted pendulum mobile robots

Abstract

This paper introduces a tilt control based movement control scheme for inverted pendulum mobile robots. It is based on direct tilt angle control (DTAC) with a disturbance observer using the Kalman filtering technique. The DTAC is expected to be an effective for high acceleration, and the presented observer achieves a better estimation even if tilt joint angle sensor is a poorly-resolved. Although we have presented it in the previous papers and conferences, a drawback remains and it is shown high-speed curve and fast turn motions. It seems that the tilt angle sensor attached in the pendulum body causes instable during curved and turning motions. Where the sensor consistes of a rotary encoder with two thin and light arms which touch the floor. To fix this problem, we have adopted a gyro scope and concurrently design an observer. The gyro scopes are well-known and the basic structure of the observer is the same as the one presented by S.Matsumoto,Y.Fujimoto, et.al. However, this paper describes a try combining it with our original DTAC scheme.

Dynamic modelling and stabilization of a new configuration of two-wheeled machines

“…An undergoing research to control inverted pendulum mobile robots with direct tilt angle control (DTAC) method has been proposed by Shimizu et al [39]. The control system developed consists of DTAC controller with a disturbance observer using Kalman filtering.…”