Direct inkjet printing of Si3N4: Characterization of ink, green bodies and microstructure

Cappi, B.; Özkol, Emre; Ebert, Jörg; Telle, Rainer

doi:10.1016/j.jeurceramsoc.2008.03.004

Cited by 96 publications

(58 citation statements)

References 20 publications

Supporting

Mentioning

Contrasting

Order By: Relevance

“…It is concluded that optimization of the process technology and material parameters are recommended to create fast, reliable and flexible production of complex-shaped non-oxide ceramic parts. Samples of developed box with two movable matches (I) and printed and sintered channel structures (II) of 3Y-TZP are given in Figure 9 [39,40]. Nowadays, a new technique of AM technology processes for dense and strong ceramic components is investigated.…”

Section: Ceramic Matrix Composites and Ceramic Componentsmentioning

confidence: 99%

Design for additive manufacturing of composite materials and potential alloys: a review

Hegab

2016

Manufacturing Rev.

View full text Add to dashboard Cite

-As a first step of applying additive manufacturing (AM) technology, plastic prototypes have been produced using various AM Process such as Fusion Deposition Modeling (FDM), Stereolithography (SLA) and other processes. After more research and development, AM has become capable of producing complex net shaped in materials which can be used in applicable parts. These materials include metals, ceramics, and composites. Polymers and metals are considered as commercially available materials for AM processes; however, ceramics and composites are still considered under research and development. In this study, a literature review on design for AM of composite materials and potential alloys is discussed. It is investigated that polymer matrix, ceramic matrix, metal matrix, and fiber reinforced are most common composites through AM. Furthermore, Functionally Graded Materials (FGM) is considered as an effective application of AM because AM offers the ability to control the composition and optimize the properties of the built part. An example of FGM through using AM technology is the missile nose cone which includes an ultra-high temperature ceramic graded to a refractory metal from outside to inside and it used for sustaining extreme external temperatures. During this work, different applications of AM on different classifications of composite materials are shown through studying of industrial objective, the importance of application, processing, results and future challenges.

show abstract

Section: Ceramic Matrix Composites and Ceramic Componentsmentioning

confidence: 99%

Design for additive manufacturing of composite materials and potential alloys: a review

Hegab

2016

Manufacturing Rev.

View full text Add to dashboard Cite

show abstract

“…Functional gradients and multi materials components can be fabricated by this printing method according to the multi www.intechopen.com nozzles. By adjusting the aperture of the printing head and by controlling the spreading phenomenon of the droplet, one can expect to reach a standard definition of around 50 m and ultimately of 10 m, taking into account the tremendous evolution in the printing field (Cappi et al, 2008;Lejeune et al, 2009). Fig.…”

Section: Three-dimensional Printingmentioning

confidence: 99%

Net-Shaping of Ceramic Components by Using Rapid Prototyping Technologies

Tian¹,

Li²,

Heinrich³

2011

Advances in Ceramics - Synthesis and Characterization, Processing and Specific Applications

View full text Add to dashboard Cite

“…This paper reviews the problem of creating composite silicon nitride ceramics using 3D printed technology. Over the last twenty years, several options of additive technological processes for manufacture of the products and blank parts of the products from silicon nitride having complex geometry and different porosity [3,4,5,6,7,8,9,10,11,12]. The process for making the products from silicon nitride by laminated object manufacturing (LOM) method was proposed in papers [3] and [4].…”

Section: Introductionmentioning

confidence: 99%

“…Slurry casting technology in fitment produced by layered modeling method (MoldSDM) was used in paper [5]. Fused Deposition Modelling (FDM) was used in paper [6]. Ceramic preparation from silicon nitride by inkjet printing using modification HP DeskJet 930c printer was proposed in papers [6,7].…”

Section: Introductionmentioning

confidence: 99%

See 1 more Smart Citation

NUMERICAL MODELING OF RESIDUAL THERMAL STRESS IN Si$_{3}$N$_{4}$ BASED HIGH-POROUS COMPOSITE CERAMICS

Rabinskiy¹

2016

Int. J. of Pure and Appl. Math.

View full text Add to dashboard Cite

Abstract:Modeling of residual thermal stresses arising in silicon nitride-based porous fibrous ceramic materials with reinforcing dispersed inclusions was carried out. Calculations were made within quasi-static linear thermoelasticity on the presumption that the initial state at which there are no internal stresses in the media is realized during synthesis of the material at temperature of 1450 • C. Modeling was carried out on three-dimensional representative fragments of fibrous structures generated using random algorithms with preset parameters of the materials' microstructure. Influence of the volume fraction and the size of the fillers in the form of spherical inclusions of silicon carbide on the residual thermal stresses realized within the structure of fibrous porous material is analyzed. It is demonstrated that the level of arising residual stresses can be comparable and, indeed, may exceed the fracture strength of considered porous materials.

show abstract

Direct inkjet printing of Si3N4: Characterization of ink, green bodies and microstructure

Cited by 96 publications

References 20 publications

Design for additive manufacturing of composite materials and potential alloys: a review

Design for additive manufacturing of composite materials and potential alloys: a review

Net-Shaping of Ceramic Components by Using Rapid Prototyping Technologies

NUMERICAL MODELING OF RESIDUAL THERMAL STRESS IN Si$_{3}$N$_{4}$ BASED HIGH-POROUS COMPOSITE CERAMICS

Contact Info

Product

Resources

About