Direct electrospinning of cellulose in the DBU-CO2 switchable solvent system

Abstract

We report the use of the DBU-CO2 switchable solvent system for the direct electrospinning of cellulose. Two cellulose types were investigated, i.e. microcrystalline cellulose (MCC) and cellulose pulp (CP). The morphologies of the obtained cellulose fibers were studied using scanning electron microscopy and optical microscopy. Results obtained showed that only particles with mean diameter about 1.2 μm could be obtained when MCC was used, even at high concentration (10 wt%). In the case of CP, an optimized concentration of 4 wt% resulted in standing fibers with a mean diameter of about 500nm. In order to improve the spinnability of the cellulose, different concentrations and ratios of PVA in combination with cellulose were investigated. The combination of cellulose (both MCC and CP) resulted in the formation of a unique fiber morphology, characterized by a homogeneous bead-like structure. An in-depth study of the fiber structure was carried out using Raman spectroscopy and showed that both cellulose and PVA were present in the formed beads. Finally, the challenge observed remained a complete removal of the solvents, which are not volatile enough, as well as explore a coagulation collection process for the fiber recovery in order to recover and re-use the employed solvent. Graphic abstract

Direct Evidence for Reaction between Cellulose and CO2 from Nuclear Magnetic Resonance

“…This is similar to the reaction between cellulose and carbon disulfide to form water-soluble cellulose xanthate used in the still-common viscose process . Direct electrospinning of fibers from the CO 2 /base/DMSO solvent system has recently been reported . Cellulose films produced from this solvent have been reported to consist of cellulose IV I , a crystal structure not normally seen in technical applications.…”

Closing the Carbon Loop in the Circular Plastics Economy

“…In recent years, progress has been made by Meier, who introduced a more sustainable process for esterification of cellulose in a switchable 1,8diazabicyclo[5.4.0]undec-7-en (DBU)/CO 2 solvent system that holds promise for the development and processing of advanced cellulose-based plastics. [165][166][167][168][169][170][171][172][173] Tough and transparent cellulose nanopaper with high porosity was derived from aqueous dispersions of cellulose nanofibrils. [174][175][176][177][178][179] Advances in nanofibrillated cellulose production and its potential applications, ranging from nanopaper to nanocomposites, coatings, and food packaging, have been addressed by several reviews.…”

Valorization of Oil Palm Empty Fruit Bunch (OPEFB) as Membrane Polymer via Non-solvent Induced Phase Separation Method (NIPS) for Removal of Aqueous Contaminants

“…Several studies utilizing cellulose as synthesized bers previously dissolved in some non-derivatizing solvents were conducted by [18] using TFA and DCE as the solvents via electrospinning. Recently, Hedidari et al [19] also used the direct method of cellulose dissolution in electrospinning using microcrystalline cellulose (MCC) and cellulose pulp (CP) as a feedstock for membrane polymer with DBU-CO 2 system as the solvent. On the other hand, Teow et al [20] formulated membranes from the mixture of OPEFB cellulose and PVDF; yet the solvent they used were mixture of 95% 1-methyl-2-pyrrolidone (NMP) and LiCl to remove dye from water.…”