Direct 3D-printing of phosphate glass by fused deposition modeling

Zaki, Reda Mohammed; Strutynski, Clément; Kaser, Simon; Bernard, Dominique; Hauss, Grégory; Faessel, Matthieu; Sabatier, Jocelyn; Canioni, Lionel; Messaddeq, Younès; Danto, Sylvain; Cardinal, Thierry

doi:10.1016/j.matdes.2020.108957

Cited by 39 publications

(23 citation statements)

References 41 publications

Supporting

Mentioning

Contrasting

Order By: Relevance

“…V Objects with engineered bulk properties. Va 3d printed phosphate glass piece [15]. Vb 3d printed part with multimaterial filament [21] We first start with 3D printing pairs of identical preforms with square cross-sections 1 cm × 1 cm × 25 cm using polycarbonate (Stratasys PC-10) in an FDM printer (Stratasys Fortus 450mc) at different print orientations.…”

Section: D Printed Polymeric Fibersmentioning

confidence: 99%

“…II Schematic illustration of the fabrication process of soft transmission lines and the weaving of the resulting fiber into the fabric, demonstrating flexibility and stretchability, adapted from [59]. III Phosphate glass fiber fabrication via a thermal draw, and its subsequent use in FDM 3D printing for the fabrication of designed glass parts, adapted from [15]. IV Structured fiber fabrication and subsequent use as multimaterial structured filament in 3D printing of objects with embedded electronic functionalities, adapted from [20] spanning the entire fiber length.…”

Section: Recursive Manufacturingmentioning

confidence: 99%

“…AM applications are numerous, spanning but not limited to aerospace, biomedicine, and architecture, owing to cost-effectiveness and the inherent flexibility of the technique [14,15]. The growing success of AM also draws the attention of the optical community, and several advanced AM methods have been demonstrated for fabricating both glass and polymeric structures.…”

Section: Introductionmentioning

confidence: 99%

“…1III), used in bioprinting for the development of biosynthetic interfaces and tissue engineering [5] ( Fig. 1IV), in the fabrication of objects with engineered bulk properties [15,21] (Fig. 1V), or used recursively in the fabrication of a new preform, for example in rescaling bundled fibers as done in [22].…”

Section: Introductionmentioning

confidence: 99%

See 3 more Smart Citations

3D Printing in Fiber-Device Technology

et al. 2021

View full text Add to dashboard Cite

Recent advances in additive manufacturing enable redesigning material morphology on nano-, micro-, and meso-scale, for achieving an enhanced functionality on the macro-scale. From non-planar and flexible electronic circuits, through biomechanically realistic surgical models, to shoe soles individualized for the user comfort, multiple scientific and technological areas undergo material-property redesign and enhancement enabled by 3D printing. Fiber-device technology is currently entering such a transformation. In this paper, we review the recent advances in adopting 3D printing for direct digital manufacturing of fiber preforms with complex cross-sectional architectures designed for the desired thermally drawn fiber-device functionality. Subsequently, taking a recursive manufacturing approach, such fibers can serve as a raw material for 3D printing, resulting in macroscopic objects with enhanced functionalities, from optoelectronic to bio-functional, imparted by the fiber-devices properties. Graphic abstract

show abstract

Section: D Printed Polymeric Fibersmentioning

confidence: 99%

Section: Recursive Manufacturingmentioning

confidence: 99%

Section: Introductionmentioning

confidence: 99%

Section: Introductionmentioning

confidence: 99%

See 2 more Smart Citations

3D Printing in Fiber-Device Technology

et al. 2021

View full text Add to dashboard Cite

show abstract

“…150 Important advances include the printing of transparent silica 151 and, then, of preforms that were subsequently drawn into fiber. [152][153][154][155] The recent extension to other optical glasses, notably soft glasses such as chalcogenides 156 and phosphates, 157 is especially exciting.…”

Section: Ballato and Dragicmentioning

confidence: 99%

Glass: The carrier of light—Part II—A brief look into the future of optical fiber

Ballato

Dragic

2020

Int J of Appl Glass Sci

View full text Add to dashboard Cite

show abstract

3D Printing of Luminescent Glass with Controlled Distribution of Emission Colors for Multi‐Dimensional Optical Anti‐Counterfeiting

Ouyang

Zhang

et al. 2023

Laser & Photonics Reviews

View full text Add to dashboard Cite

The fabrication of multicolor luminescent glass with simultaneous controlling of the distribution of emission colors within a monolithic medium has been a tremendous challenge, which, however, could be attractive for diverse photonic applications from optical storage to information encryption. Here, a space‐selective doping method based on a stereolithographic technique is designed, enabling the control of the doping domain of the active luminescence ions, such as Eu3+, Ce3+, Tb3+, and Pr3+, in 3D‐printed single silica glasses. The printed glass shows intense multicolor luminescence, and the interface between the two doping areas is invisible under natural light. By using this technique, multicolor luminescent glass with pre‐designed emission color distribution is fabricated, which enables facile and nondestructive decryption strategies based on photoluminescence under controlled excitation conditions. Besides, the extending of this strategy by using a femtosecond laser for photopolymerization dramatically improves the printing resolution down to the few‐micron scale, enabling the multi‐dimensional optical storage and encryption in miniaturized glass items. This work not only delineates the potential applications of multicolor luminescent glass for multi‐dimensional anti‐counterfeiting and information storage, but also opens up new avenues for prospective applications in sensing, lasers, and displays based on glasses with spatially engineered optical responses.

show abstract

Direct 3D-printing of phosphate glass by fused deposition modeling

Cited by 39 publications

References 41 publications

3D Printing in Fiber-Device Technology

3D Printing in Fiber-Device Technology

Glass: The carrier of light—Part II—A brief look into the future of optical fiber

3D Printing of Luminescent Glass with Controlled Distribution of Emission Colors for Multi‐Dimensional Optical Anti‐Counterfeiting

Contact Info

Product

Resources

About