Digital Hydraulic Design for Low-Specific-Speed Propeller Runners with Fixed Blades

Abstract

The operating point of a propeller hydropower station will deviate from the effective workspace while the discharge reduces excessively during dry seasons. It usually leads to a decrease in efficiency and even to being unable to work. To solve the above problem, a scheme named decreasing capacity to increase efficiency was presented in this article. A low-specific-speed propeller runner with fixed blades that has the same installing dimensions as the original one was redesigned and equipped in dry seasons. A positive circulation at the outlet of the blades bigger than in conventional runners is allowed. Some key technologies about hydraulic design for runner blades were researched, which include distribution of velocity circulation at the inlet and outlet of the runner, thickening of the epiphyseal line of an aerofoil, unfolding aerofoil being converted to a cylindrical section, etc. In the section on digital modeling for runner blades, aerofoils on the cylindrical sections at the rim and at the hub were constructed employing the trend extrapolation method. Moreover, a blade digital model was built at one time according to the aerofoils on all cylindrical sections by means of a successful redevelopment to UniGraphics, and it has perfect symmetry. A case presented indicates that the method of decreasing capacity to increase efficiency is feasible. Using the method, the turbine efficiency increased from less than 28.6% to 83.4% while the discharge decreased from 3.20 m3s−1 to 1.00 m3s−1, and then the hydropower unit was able to work properly.