Differential Inverse Kinematics of a Redundant 4R Exoskeleton Shoulder Joint

Abstract

Most active upper-extremity rehabilitation exoskeleton designs incorporate a three sequential rotational shoulder joint with orthogonal axes. This kind of joint has poor conditioning close to singular configurations when all joint axes become coplanar, which reduces its effective range of motion. We investigate an alternative approach of using a redundant non-orthogonal 4R shoulder joint. By inspecting the behavior of the possible nullspace motions, a new method is devised to resolve the redundancy in the differential inverse kinematics (IK) problem. A 1D nullspace global attraction method is used, instead of naive nullspace projection, to guarantee proper convergence. The design of the exoskeleton and the proposed IK method ensure good conditioning, avoid collisions with the human head, arm and trunk, can reach the entire human workspace, and outperforms conventional 3R orthogonal exoskeleton designs in terms of lower joint velocities and no body collisions.

An Efficient and Accurate Inverse Kinematics for 7-DOF Redundant Manipulators Based on a Hybrid of Analytical and Numerical Method

“…In addition, the algorithm generates singularity when e o is parallel with e b or e e , because there are infinite solutions to (2) and (3). This paper adopts θ o , θ e rather than traditional ''manipulability'' [28] to indicate the singular degree of the manipulator and θ o = < e b , e o >, θ e = < e e , e o > .…”

Upper limb rehabilitation using robotic exoskeleton systems: a systematic review

“…The elbow and wrist joints each have two degrees of freedom i-e elbow flexion/extension, forearm supination/pronation, wrist flexion/extension and wrist ulnar/radial deviation. Majority of the exoskeleton robots developed for upper limb provide actuation at only shoulder and elbow [16,25,34,[43][44][45][46][47][48][49][50][51][52]. Only a few devices provide additional actuation for the forearm, wrist and sternoclavicular joints [53].…”

A Human-like Inverse Kinematics Algorithm of an Upper Limb Rehabilitation Exoskeleton

“…This method is applicable to nonstrict motion trajectories and require significant computational resources during the training phase. Differential kinematics can be combined with the gradient projection method to complete end-effector tasks and optimize the joint motions of redundant robots [25][26][27]. A kinematically redundant robot is a mechanism that has more DOF than are required to perform a given task.…”