Development of very large electrode arrays for epiretinal stimulation (VLARS)

Abstract

BackgroundRetinal implants have been developed to treat blindness causing retinal degenerations such as Retinitis pigmentosa (RP). The retinal stimulators are covering only a small portion of the retina usually in its center. To restore not only central vision but also a useful visual field retinal stimulators need to cover a larger area of the retina. However, large area retinal stimulators are much more difficult to implant into an eye. Some basic questions concerning this challenge should be answered in a series of experiments.MethodsLarge area retinal stimulators were fabricated as flexible multielectrode arrays (MEAs) using silicon technology with polyimide as the basic material for the substrate. Electrodes were made of gold covered with reactively sputtered iridium oxide. Several prototype designs were considered and implanted into enucleated porcine eyes. The prototype MEAs were also used as recording devices.ResultsLarge area retinal stimulator MEAs were fabricated with a diameter of 12 mm covering a visual angle of 37.6° in a normal sighted human eye. The structures were flexible enough to be implanted in a folded state through an insertion nozzle. The implants could be positioned onto the retinal surface and fixated here using a retinal tack. Recording of spontaneous activity of retinal neurons was possible in vitro using these devices.ConclusionsLarge flexible MEAs covering a wider area of the retina as current devices could be fabricated using silicon technology with polyimide as a base material. Principal surgical techniques were established to insert such large devices into an eye and the devices could also be used for recording of retinal neural activity.

Development of a Magnetic Attachment Method for Bionic Eye Applications

“…Although epiretinal prostheses can be attached to the retina by tacks or glue, this is not suitable to our device design. The EPIRET III device is reportedly <50 μm thick , while the Argus II is <500 μm . In comparison, the Bionic Vision Australia epiretinal device, comprising a fully implanted diamond multielectrode and diamond capsule to hermetically encapsulate the electronics microchip, is closer to 1 mm thick, and as a result, the tacks need to penetrate through a thick silicone membrane and support 120 mg of mass.…”

70‐4: Late‐News Paper: Electronic Contact Lens for Senses beyond Sight

“…1 c,d). Fabrication of microelectrode discs is well characterized and fabrication on flexible substrates has been demonstrated [18], [19], [20]. Due to their small size, multiple individually-addressable microelectrodes may be incorporated into a single SCL.…”

Zukünftige Entwicklungen bei implantierbaren Netzhautprothesen

“…1). Mit diesem System wurden Machbarkeitsuntersuchungen hinsichtlich der Implantation, aber auch hinsichtlich der kortikalen Aktivierung am Kaninchen durchgeführt [31,32].…”