Development of the W7-X Alkali Metal Beam Diagnostic Observation System for OP2

Abstract

On a Wendelstein 7-X (W7-X), an alkali metal beam (AMB) diagnostic system was installed in order to measure the plasma edge electron density profiles and turbulence transport. A sodium beam was injected in the plasma, and the light emission was observed by an optical system. During the last operation phase, OP1.2b campaign trial spectral measurements were performed with a dedicated optical branch. The results showed the emergence of potential CX lines in the light spectra during sodium injection. The lines were identified as Carbon III, which were the dominant lines observed by other diagnostics at the edge plasma. Based on these results, an additional dedicated optical system was developed and installed in 2021 for the upcoming operational phase, OP2. The optics were designed for multiple purposes: spectral measurements for the AMB system and for a He/Ne gas jet. The system was designed to allow implementation of further diagnostics on this port later (e.g., coherence imaging system). The details of the implementation of the design requirements and the main challenges of the manufacturing process and installation are discussed in this paper.

Statistical analysis of plasma filaments in the island divertor of Wendelstein 7-X

“…The ABES system [13] on W7-X includes an 50 kV neutral sodium beam [14] injected on the equatiorial plane (see figure 1) of the device at φ = 72 • toroidally, and observed perpendicularly to the beam [15]. It goes through the SOL, the divertor island o-point, and the plasma edge.…”