Development of the k 0-based cyclic neutron activation analysis for short-lived radionuclides

Abstract

The k 0 -based cyclic neutron activation analysis (k 0 -CNAA) technique has been studied to explore the applicability at the Portuguese research reactor (RPI). In particular, for the determination of elements which form short-lived radionuclides, particularly fluorine ( 20 F, 11.16 s half-life) and selenium ( 77m Se, 17.36 s half-life) in polymer, biological and environmental samples. The detection limits obtained for F and Se were about 50 and 0.01 mg kg -1 , respectively, in the investigated materials. The timing parameters for the procedure were 10 to 20 s for irradiation, 5 s decay, 10 to 20 s counting, 5 s waiting and performed with eight cycles. The k 0 -IAEA program was modified to use millisecond time resolution for irradiation, decay and counting times as needed for interpreting k 0 -CNAA data in terms of concentration, accuracy and detection limit. The quality control of the procedure was performed by preparing a standard solution containing fluorine with different contents as well as using the certified reference materials containing selenium from which the bias between the results and the certified values were within 15% for most elements at the investigated content ranges. The analytical results for several other elements producing short-lived or detectable radionuclides, e.g., Al, Ca, Cl, Cu, Dy, I, Mg, Mn, Ti, and V were also obtained by the k 0 -CNAA procedure with accuracy within 12%.

Self-characterization of irradiation facility using synthetic multi-element standard for determination of k0-factors of seven radionuclides of interest

“…The original 250-kW TRIGA Mark-II reactor, located at Dalat City, South of Viet Nam, was constructed and put into operation in March 1963. It was upgraded to a power of 500-kW in 1984 using the Russian VVR-M2 fuel type and renamed as Dalat nuclear research reactor (DNRR) [1]. The reactor has been used for neutron activation analysis (NAA), radioisotope production, nuclear educational training, and fundamental and applied research.…”

Combination and optimization of the cyclic NAA modes at the Dalat research reactor for determination of selenium in biological materials using 77mSe

“…The principle of CNAA has been reported in detail [1]. In addition, the k0-based cyclic NAA has recently developed for the determination of a few shortlived nuclides [2]. In cyclic NAA, the sample is irradiated for a short period of time.…”