Development of Soil Moisture Content and Soil Matric Suction Model Based on Field Instrumentation and Electrical Resistivity Imaging (ERI) for Highway Slopes Constructed on High Expansive Clay Soil

Near-surface soil moisture content variation is a major factor in the frequent shallow slope failures observed on Mississippi’s highway slopes built on expansive clay. Soil moisture content variation is monitored generally through borehole sensors in highway embankments and slopes. This point monitoring method lacks spatial resolution, and the sensors are susceptible to premature failure due to wear and tear. In contrast, Unmanned/Uncrewed Aerial Vehicles (UAVs) have higher spatial and temporal resolutions that enable more efficient monitoring of site conditions, including soil moisture variation. The current study focused on developing two methods to predict soil moisture content (θ) using UAV-captured optical and thermal combined with machine learning and statistical modeling. The first method used Red, Green, and Blue (RGB) color values from UAV-captured optical images to predict θ. Support Vector Machine for Regression (SVR), Extreme Gradient Boosting (XGB), and Multiple Linear Regression (MLR) models were trained and evaluated for predicting θ from RGB values. The XGB model and MLR model outperformed the SVR model in predicting soil moisture content from RGB values. The R2 values for the XGB and MLR models were >0.9 for predicting soil moisture when compared to SVR (R2 = 0.25). The Root Mean Square Error (RMSE) for XGB, SVR, and MLR were 0.009, 0.025, and 0.01, respectively, for the test dataset, affirming that XGB was the best-performing model among the three models evaluated, followed by MLR and SVR. The better-performing XGB and MLR models were further validated by predicting soil moisture using unseen input data, and they provided good prediction results. The second method used Diurnal Land Surface Temperature variation (ΔLST) from UAV-captured Thermal Infrared (TIR) images to predict θ. TIR images of vegetation-covered areas and bare ground areas of the highway embankment side slopes were processed to extract ΔLST amplitudes. The underlying relationship between soil surface thermal inertia and moisture content variation was utilized to develop a predictive model. The resulting single-parameter power curve fit model accurately predicted soil moisture from ΔLST, especially in vegetation-covered areas. The power curve fit model was further validated on previously unseen TIR, and it predicted θ with an accuracy of RMSE = 0.0273, indicating good prediction performance. The study was conducted on a field scale and not in a controlled environment, which aids in the generalizability of the developed predictive models.

show abstract

Development of Soil Moisture Content and Soil Matric Suction Model Based on Field Instrumentation and Electrical Resistivity Imaging (ERI) for Highway Slopes Constructed on High Expansive Clay Soil

Cited by 3 publications

References 31 publications

Development of a Highway Slope Failure Warning System Using Field Instrumentation

Development of a Highway Slope Failure Warning System Using Field Instrumentation

Identifying unsaturated suction variations of Highway Embankments using coupled Electrical Resistivity Imaging (ERI) and Field Instrumentation

Near-Surface Soil Moisture Characterization in Mississippi’s Highway Slopes Using Machine Learning Methods and UAV-Captured Infrared and Optical Images

Contact Info

Product

Resources

About