Development of Simulator for Shading Area Detecting in UAV Photogrammetry

Kim, Jae-Koo; Kim, Ji-Sung; Jeon, Kyeong-Mi

doi:10.9728/dcs.2019.20.10.1917

Cited by 2 publications

(3 citation statements)

References 6 publications

Supporting

Mentioning

Contrasting

Order By: Relevance

“…Table 1 demonstrates the essential functions of the simulator and details of each function. The basic structure of the simulator follows the one reported by Kim et al [36,37] because it is the most recently developed simulator and the only one designed specifically for shaded area detection. The system architecture was designed as shown in Figure 2.…”

Section: Target Functionmentioning

confidence: 99%

“…The simulator can be applied to an actual or virtual UAV. When applied to an actual UAV, the simulator transmits route information to the UAV using the Micro Air Vehicle The basic structure of the simulator follows the one reported by Kim et al [36,37] because it is the most recently developed simulator and the only one designed specifically for shaded area detection. The system architecture was designed as shown in Figure 2.…”

Section: Target Functionmentioning

confidence: 99%

“…To overcome these limitations, Kim et al developed a simulator that can plan the flight path and check the shading area of a 3D model in advance [36,37]. The simulator can check the quality of the 3D model before flying and supports both nadir and oblique shooting.…”

Section: Introduction 1backgroundmentioning

confidence: 99%

See 2 more Smart Citations

Development and Validation of Unmanned Aerial Vehicle Photogrammetry Simulator for Shaded Area Detection

Kim

Kim²,

Jeon³

et al. 2022

Applied Sciences

View full text Add to dashboard Cite

In unmanned aerial vehicle (UAV) photogrammetry, the qualities of three-dimensional (3D) models, including ground sample distance (GSD) and shaded areas, are strongly affected by flight planning. However, during flight planning, the quality of the output cannot be estimated, as it depends on the experience of the operator. Therefore, to reduce the time and cost incurred by repetitive work required to obtain satisfactory quality, a simulator, which can automatically generate a route, acquire images through simulation, and analyze the shaded areas without real flight, has been required. While some simulators have been developed, there are some limitations. Furthermore, evaluating the performance of the simulator is difficult owing to the lack of a validation method. Therefore, to overcome the limitations, target functions, which can plan flights and can detect shaded areas, were set, developed, and validated in this study. As a result, a simulator successfully planned a flight and detected shaded areas. In this way, the simulator was validated to determine the applicability of its performance. Furthermore, the outputs of this study can be applied to not only UAV photogrammetry simulators but also other 3D modeling simulators.

show abstract

Section: Target Functionmentioning

confidence: 99%

Section: Target Functionmentioning

confidence: 99%

See 1 more Smart Citation

Development and Validation of Unmanned Aerial Vehicle Photogrammetry Simulator for Shaded Area Detection

Kim

Kim²,

Jeon³

et al. 2022

Applied Sciences

View full text Add to dashboard Cite

show abstract

Development of Pre-flight Simulator to Improve The 3D Modeling Efficiency using UAV

Kim¹,

Kim²,

Jeon³

2020

dcs

Self Cite

View full text Add to dashboard Cite

Unmanned Aerial Vehicle (UAV) is used in a variety of fields because there are no people on board. In particular, technologies for 3D modeling using UAV are being researched and developed. In 3D modeling using such an UAV, in order to save time and cost and improve the quality of output, a flight plan must be established in advance with the characteristics of the object to be model. However, it is difficult to find a simulator that can check the flight path and the product in advance with the characteristics of object. Therefore, in this study, a pre-flight simulator was developed to improve the efficiency of 3D modeling by applying point cloud data and LOD. In addition, to verify the performance of the simulator, the estimated product of the simulator and the actual product were compared.

show abstract

Development of Simulator for Shading Area Detecting in UAV Photogrammetry

Cited by 2 publications

References 6 publications

Development and Validation of Unmanned Aerial Vehicle Photogrammetry Simulator for Shaded Area Detection

Development and Validation of Unmanned Aerial Vehicle Photogrammetry Simulator for Shaded Area Detection

Development of Pre-flight Simulator to Improve The 3D Modeling Efficiency using UAV

Contact Info

Product

Resources

About