Innovative technologies for the secondary drilling of productive reservoirs, based on the multihole drilling deeply remoted from the wellbore and with controlled trajectories, to overcome the contamination of the pay zone, and with the ability to carry out various geological and technological wellworks many times over, can significantly increase the efficiency of the development of old and marginal wells. To implement such tasks, it is necessary to use special technological drilling equipment, one such technical system (TS) is the Perfobore system, which uses a modular construction. The methodology allows to choose an optimal variant for the power sections with a high-torque, small-sized positive displacement motor PDM, previously developed by specialists at the Perfobore company. This made it possible to design universal sectional motors with diameters of 43 to 54 mm with improved characteristics compared to serial PDMs. The production of prototypes of multi-section PDMs and their successful bench and then field tests (FT), from 2018 to 2020, in the Uralopovolzhskaya and West Siberian oil and gas provinces, as part of the TS Perfobore, proved the correctness of the chosen technical strategy.