Development of Hybrid Membrane Systems for Highly Mineralized Waste Utilization in the Power Industry

Abstract

In the context of limited water resources and the deterioration of natural water bodies’ state, and with the increase in the regulatory requirements for the quality of effluents, assessing the impact of the industrial and energy complex on water bodies is a task of increasingly greater significance to the whole energy sector. “zero discharge” is considered the most effective strategy for creating environmentally friendly thermal power plants. Hybrid reverse osmosis electrodialysis systems make it possible to obtain solutions with a higher concentration of components compared to single electrodialysis treatment, i.e., more efficient separation of brine and pure water. This article proposes experimental and pilot-industrial studies of a hybrid membrane system operation using industrial wastewater for the disposal of liquid waste from an ion-exchange chemical-desalting water treatment plant of a thermal power plant, followed by a calculation of economic efficiency and an analysis of the environmental feasibility of its use. The developed technological scheme offers separate processing of acidic and alkaline waste regeneration solutions using calcium carbonate reagent and desalination on baromembrane and electromembrane units to obtain clean water and dry residue. The hybrid system includes a booster filter press and an evaporator. The hybrid system makes it possible to provide a thermal power plant with a “zero discharge” with a minimum consumption of reagents and electricity, as well as return all wastewater back to the power plant cycle.

Numerical Simulation of Processes in an Electrochemical Cell Using COMSOL Multiphysics

“…16, x FOR PEER REVIEW 16 of 20 the majority of the operating range, the deviation does not exceed 6 percent. It also aligns with the results obtained by other researchers[47][48][49]. However, simulations indicate different current densities at lower voltages.…”