Development of dual phase soft magnetic laminate for advanced electric machines

Abstract

The development of dual phase soft magnetic laminate for advanced electric machines at General Electric is summarized, including alloy development, properties, manufacturing trials, prototype experience, potential applications, and future material development. Dual phase soft magnetic laminates provide the flexibility to tune magnetic/non-magnetic state at the desired locations, using solution nitriding treatment with protective mask/coating. This enabling material technology benefits electric machine performance by reducing flux leakage in the laminates. It also decouples the electromagnetic and mechanical design, which opens up the design space for advanced electric machines. Magnetic and mechanical properties of dual phase laminates were compared to commercial FeSi and FeCo soft magnetic laminates. Driven by the market needs for high power density and high-speed electric machines, a synchronous reluctance (SynRel) machine without PMs using dual phase soft magnetic laminates was assessed in machine electromagnetic performance as well as rotor stress analysis by finite element simulation. Successful prototype build and testing further retired manufacturing risks and advanced the technology maturity level. Future material development with higher mechanical strength, higher saturation magnetization, higher permeability, and lower loss are highly desired for ground and air transportation electrification.

Determination of the Boundaries of the Non-Magnetic Phase of the Dual-Phase Magnetic Material of the Starter-Generator Rotor

“…For the non-magnetic region, there is a significant decrease in magnetic characteristics and a significant increase in strength properties. At the same time, in the magnetic region, an insignificant drop in electromagnetic properties is observed, but a rather noticeable drop in strength properties, which should be taken into account when designing electrical machines with dual-phase magnetic materials [8,9].…”