Development of a new technology for the fight against wax deposits

Abstract

One of the most serious complications in the production, transport and treatment of oil is asphaltene-resin-paraffin deposits. Their formation in underground well equipment, as well as in flow lines, collection system pipelines increase the cost of oil production. There are no sufficiently effective reagents to solve these problems. The results of implementation in many other wells testify to the high efficiency of the new reagent. The effect of reagents on the rheological properties of oil was also studied. Sangachal Deniz oil was used as a crude oil sample. We have developed multicomponent and multifunctional reagents M-R, P-R. In addition, due to paraffin formations in the tubing, they had to change 50–60 pipes for new ones every month. As a result of the introduction of M-R reagents, no paraffin deposits were found in the tubing for almost a year The effect of these reagents on the pour point of oils, dispersion, dissolution, and paraffin deposition has been studied. The use of the new reagent was tested at the mines of the oil and gas production department (OGPD) "28 May". The results of implementation in many other wells testify to the high efficiency of the new reagent. The effect of reagents on the rheological properties of oil was also studied. Sangachal Deniz oil was used as a crude oil sample.
 The proposed three-parameter Herschel-Bulkley model can be used to assess the rheological parameters of oils during their transportation. This layer, of course, cannot thicken indefinitely. Highly effective multicomponent composite compositions were developed to combat complications in the production of high-asphaltene-resin-paraffin oils. As can be seen from, during the reagent dosing period, there were no particular changes in the well performance. Treatment with hot oil on certain days was, as it were, of a preventive nature, since no changes were observed in the well parameters before and after heat treatment. When a certain layer thickness is formed in the tubing, the linear velocity of oil increases and begins to wash it away