Development of a new magnetic mirror device at the Korea Advanced Institute of Science and Technology

Abstract

A new magnetic mirror machine named KAIMIR (KAIST mirror) has been designed and constructed at the Korea Advanced Institute of Science and Technology (KAIST) to study mirror plasma physics and simulate the boundary regions of magnetic fusion plasmas such as in a tokamak. The purpose of this paper is to introduce the characteristics and initial experimental results of KAIMIR. The cylindrical vacuum chamber has a length of 2.48 m and a diameter of 0.5 m and consists of three sub-chambers, namely the source, centre and expander chambers. A magnetic mirror configuration is achieved by electromagnetic coils with a maximum magnetic field strength of 0.4 T at the mirror nozzles and 0.1 T at the centre. The source plasma is generated by a plasma washer gun installed in the source chamber with a pulse forming network system. The typical discharge time is ~12 ms with a ~6 ms (1–7 ms) steady period. Initial results show that the on-axis electron density at the centre is 1019–20 m−3 and the electron temperature is 4–7 eV. Two parameters were varied in this initial phase, the source power and the mirror ratio, which is the ratio of highest to lowest magnetic field strength in the mirror-confined region. We observed that the increase of the electron density was mitigated for a source power above 0.2 MW. It was also found that the electron density increases almost linearly with the mirror ratio. Accordingly, the stored electron energy was also linearly proportional to the mirror ratio, similar to the scaling of the gas dynamic trap.