Development, Implementation and Evaluation of a Prototype System for Data-Driven Optimization of a Preforming Process

Abstract

Modern production of fiber reinforced composites via the preforming process is widely used in the industry. A common way to create dry, semi-finished fiber products is forming or draping a textile into a three-dimensional component geometry. The punch and die process is often used for resin transfer molding (RTM) composite manufacturing. Due to the major influence of the preforming step on the later mechanical performance of the component, a detailed knowledge of the fiber architecture is beneficial.To enable in-situ monitoring of the specific deformation of a woven fabric, a novel kind of single-use two-dimensional strain sensors has already been developed and characterized. We show that by using industrial communication standards, data from various data sources can be consolidated in an edge computer and used to improve the process. To this end, we developed the hardware and firmware of a device that reads out the printed strain sensors and transfers the data to the edge device via IO-Link. In addition, the edge device collects data from a programmable logic controller and is capable of connecting further IO-Link sensors.Our demonstrator is intended as a proof of concept for in-situ monitoring, data-driven analysis and improvement of the punch and die process and will be further developed. We propose a machine learning-based edge analytics approach for detecting defects and increasing the preforming quality during the draping process. Forming tests with the double-dome benchmark geometry and the carbon fabric which is suitable for industry have been carried out to validate our prototype system.