Development and Validation of Uv Spectroscopic Method of Paliperidone Palmitate in Bulk and Its Application for Drug Loading and Entrapment Efficiency Analysis of Long-Acting Injectable Microspheres

Abstract

Objective: The objective of the current study was to develop simple, precise and cost-effective ultraviolet (UV) spectroscopic method for estimation of paliperidone palmitate (PP) as a bulk and in the polymeric depot dosage form.
 Methods: UV spectrophotometer with quartz sample cells and spectral manager software was used for analysis samples. 20 % Methanol in Mili-Q-Water was used as a solvent for the sample and standard preparations. Method validation was carried out as per ICH Q2 (R1) guidelines. Stress degradation studies were carried out to check the stability-indicating performance of the developed method. The validated method was applied for the estimation of the PP content of long-acting injectable microspheres of PP.
 Results: The wavelength of maximum absorption was found to be 283 nm. The proposed method was validated in the range of 5-30 µg/ml of PP. The mean recovery for 80%, 100% and 120% standard solution was found to be 99.03%, 99.21% and 99.35% respectively with less than 2% relative standard deviation (RSD). Intra-day and inter-day method precision ranged from 0.54 to 1.62% and 0.67 and 1.24% respectively. Limit of detection (LOD) and limit of quantitation (LOQ) were estimated to be 0.03 and 0.10 µg/ml respectively. The developed method was found to be robust and rugged. Stress degradation studies were carried out under acidic, alkaline, hydrolytic and oxidative and photo stress. The proposed method was capable to detect changes in assay due to stress conditions.
 Conclusion: The developed method was successfully employed for routine analysis of drug loading in long-acting injectable microspheres of PP.