Development and validation of stability-indicating RP-HPLC method for estimation of dalfampridine in bulk drug and tablet dosage form

Abstract

Background In the current study, a simple, improved, precise, rapid, and accurate reverse phase liquid chromatographic method was produced for the estimation of dalfampridine in bulk and tablet dosage form which is a potassium channel blocker used for the treatment of multiple sclerosis (MS). The separation of dalfampridine was achieved isocratically on a C18 column (250 × 4.6 mm, 5 μm) using (0.1% v/v) buffer pH 3.0 ± 0.05 adjusted with diluted orthophosphoric acid (OPA) and acetonitrile (ACN) in the ratio of 60:40% (v/v) as a mobile phase, at a flow rate of 0.5 mL/min, and column temperature of 40 °C. HPLC grade methanol as diluents was used. Five microliters of the standard solution of the drug was injected, and the eluted analytes were detected at 262 nm. Results Dalfampridine was eluted at 4.5 min with a run time of 10 min. Linearity in the method was measured in the concentration range of 25–75 ppm with a correlation coefficient of 0.999. Limit of detection and limit of quantitation were found to be 0.711 μg/mL and 2.154 μg/mL, respectively. Dalfampridine was subjected for forced degradation stability study in conditions of thermal, acid, alkali, and oxidation and photo-degradation condition. The degradants were well resolved from the dalfampridine main peak. Validation of the developed method is carried as per USFDA and ICH guidelines. Conclusion The results of the analysis prove that the method is simple, improved, precise, accurate, and rapid for estimating the content of dalfampridine in bulk drug and tablet dosage form and can be applied for routine analysis.

Stability-indicating HPLC-DAD method for the determination of empagliflozin

“…The separation done on the method was linear over the concentration range of inter-day and intra-day precision and accuracy was between 99.14 and 99.29%. The Table 7 Results of forced degradation study for empagliflozin stability-indicating assay was done in the same manner as many reported methods [23,24]. In the degradation studies, the drug was stable up to 8 h in acidic medium, 24 h in basic medium, and 24 h under oxidative stress and there was no degradation in heat and light exposure.…”

RP-HPLC Technique for Dustasteride Quantitative Estimation in Tablet Dosage Form: Formulation and Validation of Analytical Technique

“…The spectrum covered wavelengths from 200 to 800 nm. The drug with the highest absorbance was looked at, and the Shimadzu UFLC series UV detector in the HPLC machine was used to find the right wavelength for measuring dutasteride (Bagal et al, 2021).…”

RP HPLC-Based Method Development, Validation and Stability Indicating Assay of Levosulpiride in Bulk Drug Using Analytical Quality by Design Approach

“…1 ml of the solution was withdrawn and transferred into a 10 ml volumetric flask that had been correctly diluted with a solution that had been exposed to sunlight for six days. The solution was poured into the HPLC vial and injected into the HPLC apparatus (20,20) .…”