Development and Performance Analysis of a Low-Cost Hydrogen Generation System Using Locally Available Materials

Abstract

In this paper, a low-cost water electrolyzer is developed and its performance study is presented. Locally found materials are used to develop the electrolyzer. The electrolyzer has two cells connected in parallel and bipolar electrode configuration. In common, different cells are connected in series but for this electrolyzer parallel connection has been tested. A very thin polymer, Nylon-140 has been used as separator membranes for this electrolyzer. In separator membrane assembly, the designed geometry creates two separate gas channels internally which enables the direct collection of hydrogen and oxygen gas from the designated outlet port of the electrolyzer. The geometry excludes the need of external tubing into each cell-compartments to collect hydrogen and oxygen separately. The developed electrolyzer is found to be 42% efficient with its highest production rate of 227.27 mL/min. The purity of hydrogen is found to be more than 92% and justified with the burn test. The cost is 20 times less than the commercial electrolyzers. The development method and scheme can be helpful to popularize the small scale use of hydrogen in Bangladesh for various renewable energy applications.
 Dhaka Univ. J. Sci. 68(1): 49-56, 2020 (January)

Quantitative Analysis of Green H2 Production Costs: A Comparison between Domestic Developed and Imported Electrolyzers

“…Tables 6, 7, and 8 show these costs in order. The sum of annualized investment, fixed, and variable costs gives the LCC by the equation (7). Fig.…”

“…Thus, the research developed a liquid-type alkaline electrolyzer using available low-cost materials. After development, a performance study was completed on gas production rate, efficiency, and development cost [7]. The details are given in reference paper 13.…”

“…The gas production rate is 206 mL/min or 0.0123 Nm 3 /h. The efficiency of the electrolyzer is 30.62% [7].…”

“…The HOMER input for per kW PV module cost in the setup wizard considers the total installation cost of the panels. Battery (25 kW) 312500 [22] Safety gears 5000 [23] Compressor unit 15000 [24] Inverter (3.49 kW) 59330 [25] Developed electrolyzer (3.48 kW) 72500 [7] Storage 15000 [26] Total 1381072…”

“…Solar system 261000 [27] Battery 94000 [22] Inverter 87000 [25] Compressor 12500 [24] Electrolyzer 12500 [7] Water 210000 [28] Chemical 168570…”