Development and Improvement of Methods of Calculation of Deformation of Irregular Rule Forms and Fundamentals of River Structures Under the Action of Flood Flows

Abstract

Introduction. The article presents the results of the study of irregular bottom river forms and foundations of structures, as well as coastal forms under the action of surface channel currents. It is assumed that the development of channels occurs due to the action of natural hydromorphodynamic river processes during the long stages of rivers existence formed in accordance with topographic, geological and hydrometeorological conditions. Problem Statement. Flow velocities are determined by a system of equations for the kinematics of channel flows and sediment transport, which is built on the basis of averaging the depth of flow. Purpose. Application of the developed methods of solving problems in the spatial dimension for the study of turbulent effects in the interaction with structural elements. The development of methods for applying the spatial model will be carried out at the next stage. Methods of research. Differential equations describing a nonstationary depth-averaged flow are solved using the FST2DH numerical model, which implements the finite element method. The steps typically performed when using FST2DH to study surface water flow and sediment transportation require the general necessary geographic information systems to build a network and assign boundary conditions. The equations for calculating channel erosion and erosion of bridge piers in bound soils are also considered, where it is shown that erosion depends more on soil properties than for the case of incoherent sediments, but can reach the same erosion depths with longer multi-flood calculations hydrographs. Results. Calculations of the flow kinematics of the calculated floodplain on the example of crossing the floodplain along the highway showed that the presence of a large angle of the overpass to the flood flow leads to additional conditions for increasing local erosion of supports in the form of solid rectangular columns. Significant local erosion is observed in the area of supports near the channel part. Conclusion. Based on the calculations and analysis of the kinematics and hydromorphodynamics of flows in the area of the designed bridge, recommendations on the necessary layout and design protective measures have been developed. Keywords: channel processes, erosion of bound and unbound bottom soils, erosion of piers bases of bridge crossings and overpasses, numerical methods.