Development and First Patient Trial of a Surgical Robot for Complex Trajectory Milling

Abstract

Objective: Today's surgical robots normally perform "simple" trajectories, e.g., assisting as tool-holding devices in neurosurgery, or milling linear paths for cavities in total hip replacement. From a clinical point of view, it is still a complex undertaking to implement robots in the operating room. Until now, robot systems have not been used in patient trials to mill "complex" trajectories, which involve many positional and orientation changes and are often necessary in cranio-mdofacial (CMF) surgery. This paper presents the RobaCKa surgical robot system, which allows more precise execution of surgical interventions and milling of "complex" trajectories.Materials and Methods: The main components of the RobaCKa system are a (former) CASPAR robot system, a POLARIS system, and a force-torque sensor.Results: In the first patient trial (April 2003) the planned mjectory was executed with an error of 0.66 2 0.2 mm.Conclusions: The use of former industrial robots for surgical applications is possible but complex. The advantages are improved precision and quality and the possibility of documentation. The use of such systems is normally limited to research institutions or large clinics, because it is hardly possible to implement the necessary technical and logistic efforts in routine surgical work. Comp A d Surg 8:247-256 (2003). 02003 CAS Journal, LLC

Bringing laser for osteotomy into the operation theatre

“…The robot system bRobaCKaQ has performed the first milling of a complex trajectory on a patient's scull worldwide in April 2003 [1]. Yet, the dura mater cannot be detected, the heat produced by the milling can lead to necroses and the impressed forces may move the patient and invalidate its registration.…”

Robot- and computer-assisted craniotomy (CRANIO): From active systems to synergistic man—machine interaction

“…The use of robot systems for drilling tasks on the skull has been shown to be a valuable surgical technique for the insertion of cochlea implants [5,6] and for the development of a system for craniotomy [7][8][9].…”

Development of a robotic FD‐CT‐guided navigation system for needle placement—preliminary accuracy tests

“…The systems display instrument movement within a 3D-CT data set using a graphical instrument representation. Although navigation systems have been used to guide medical robots they have been mostly used for interventions on rigid anatomical areas (orthopedics, maxillofacial and neurology) (17)(18)(19). Improvements in robot control have shown a variety of benefits.…”