Determination of thermophysical properties and density volume fractions of Al2O3/Y-ZrO2 layered composite materials using transient thermography and two-stage inverse nonlinear heat conduction analysis

Abstract

In the present study, transient thermography, a nondestructive imaging technique, is applied to evaluate the transient temperature response in a graded medium without the use of embedded thermocouples. A layered composite sample was fabricated from Al2O3 and Y-ZrO2 powders using powder metallurgy (PM). This sample was irradiated on one side with a direct current laser while the transient temperature was measured along its depth by a midinfrared camera. Also, a MATLAB code based on the truly meshless radial point interpolation method (t-RPIM) was developed and implemented to solve the problem of quasilinear transient heat transfer in PM solids. In the t-RPIM formulation, the Cartesian transformation method and the Crank-Nicolson scheme were used for the evaluation of domain integrals and time discretization, respectively, thereby yielding a truly mesh-free technique. In the conducted experiment, the thermophysical properties were assumed to be independent of temperature because of the small amount of temperature increase. These properties and the volume fractions of the constituent powders were determined using a combination of the t-RPIM and the damped Gauss-Newton method in an inverse analysis. Good agreement was found between the measured temperature and the reconstructed temperature profile using the identified thermal parameters and volume fractions, thus validating the accuracy and ability of the applied t-RPIM as a tool in an inverse scheme to solve the inverse transient heat conduction problem in nonhomogeneous media.

Modeling and Measuring Thermodynamic and Transport Thermophysical Properties: A Review

“…In addition, the method can supply the volume fractions of the constituent powders through the combination of the truly meshless radial point interpolation method (t-RPIM) and the damped Gauss-Newton method in an inverse analysis. A good agreement between the measured and the reconstructed temperature profile was found [94].…”

“…Kooshki et al [94] applied IRT to determine the thermal properties of a composite sample made of Al 2 O 3 and Y-ZrO 2 powders. A direct-current laser irradiated one side, while the transient temperature was measured along its thickness by a mid-wave (MW) infrared camera.…”