Determination of Surface Charge Density and Charge Mapping of CYTOP Film in Air using Electrostatic Force Microscopy

Abstract

Cyclic transparent optical polymer (CYTOP), a fluoropolymer, finds a plethora of applications in microelectronic devices for sustainable energy harvesting and memory devices. By and large, these devices demand high voltage breakdown, a high dielectric constant, transparency, charge storage, and retention capabilities. Despite many efforts, comprehensive investigation of the charge distribution, retention, and discharge studies conducted on the CYTOP film at the micro-scale remains elusive. Here, we present direct quantification and mapping of surface charge on the CYTOP surface at room temperature using two different modes of advanced surface probe microscopy i.e., Kelvin probe force microscopy (KPFM) and electrostatic force microscopy (EFM). We estimated that the surface charge densities of the CYTOP film using EFM are 1.4 and 3.3 μC/cm 2 for the injection of positive and negative charges, respectively. Furthermore, we determined the charge retention time for both injected positive and negative charges. We found that the retention capacity of the negative charges on the CYTOP film is much higher as compared to the positive charges. Moreover, it is also observed that injected negative charges are strongly localized on the CYTOP surface compared to the positive counterpart. Additionally, we demonstrated that charge writing is possible on the CYTOP surface using the AFM conductive tip. These results may find potential applications in energy harvesting, sensing, memory devices, security, and surveillance.