Determination of Some Physical and Mechanical Properties of Gmelina arborea Seed

Abstract

The properties of kernels, grains and seeds are important in the development of equipment for transportation, handling and processing. Physical and mechanical properties of Gmelina arborea where experimentally determined. The moisture content of Gmelina arborea was determined as 41.30%wb. The major, minor and intermediate diameters were 18.16 ± 1.79 mm, 10.52 ± 0.93 mm and 9.40 ± 0.81 mm respectively. The geometric and arithmetic mean diameter were calculated as 12.12 ± 1.10 and 9.56 ± 0.90 mm respectively. The sphericity was 66.91%, aspect ratio, 58.19, bulk and true densities, 0.64 kg/m3 and 0.96 kg/m3 respectively. The porosity and mass of a 1000 seeds were 66.67% and 621.33g respectively. The coefficient of friction determined on four different surfaces were; on wood, 0.4 ± 0.7, on galvanized steel, 0.37 ± 0.6, on glass, 0.36 ± 0.4 and on aluminum, 0.34 ± 0.6. The angle of repose was 24.09o. The compressive test conducted on the three major axes; vertical, horizontal and transverse shows that the energy needed for cracking of the Gmelina arborea is least on the horizontal axis, 0.808 ± 0.19 kN, followed by the vertical axis, 1.496 ± 0.35 kN and then the transverse axis, 2.39 ± 0.20 kN, with corresponding stress as 1.52 ± 0.35, 2.90 ± 0.45 and 4.90 ± 0.44 MPa respectively.

Investigation of Engineering Properties of Black Gram and Horse Gram for the Design of Hopper and Seed Plate of a Pneumatic Planter

“…Therefore, Planting machines need to be designed specifically for the seeds the plant. Pneumatic planters represent a significant innovation in this domain, offering precise seed placement and improved crop yields [2][3][4]. However, the effectiveness of these planters is contingent upon the design of their metering mechanism tailored to the physical and engineering properties of the seeds they dispense [5,6].…”