Tissue engineering (TE) requires a mechanically stable, biocompatible and biodegradable scaffold that allows cell adhesion, cell proliferation, cell specific properties preservation, and suitable for surgical implantations [1,2]. Therefore, fabricated TE scaffold should mimic the biomechanical properties of the organ or tissue to be regenerated. To meet such requirements, development of appropriate 3D TE scaffold remains a great challenge in terms of modelling, design and fabrication. From a design standpoint, the scaffold geometry should be produced directly from the image of the patient's defective organ, and simulate the biomechanical properties of the organ to be reconstructed. For example, the bone and cartilage tissue scaffolds usually require complex architecture, porosity, pore size, pore shape and interconnectivity in order to provide the needed structural integrity, strength, transport and ideal micro-environment for cell and tissue in growth [3]. Subsequently, the fabrication process that can build scaffolds from a range of biomaterials will be at a premium to create patient-specific scaffold. However, such materials must have the fundamental clinical approval for in vivo implantation. Rapid prototyping (RP) is an automated manufacturing process that can develop 3D scaffold by sequential delivery of energy and/or material, simulating the anatomy and properties of the tissue or organ to be regenerated [4][5][6]. The 3D scaffolds fabricated via various RP systems demonstrated the biocompatibility for TE applications [6,7].The development of scaffold using slow-degrading polymers like, poly (ε-caprolactone) (PCL) involves the need of long-term in vitro and in vivo studies [8]. Accelerated in vitro degradation experiment aims to achieve comparable degradation profile within a short period of time that saves time and ultimately financial resources, compared to the standard in vivo conditions. Though degradation study of biodegradable polymers is known to be widely explored, little detailed information is available regarding the effect of scaffold architecture on degradation kinetics. This current study focuses on the investigation of the in vitro degradation of PCL scaffolds with multiple architectures in 5 M NaOH solution at 37°C. The PCL scaffolds with single-and hybriddesigns were fabricated via in-house built desktop robot based rapid prototyping (DRBRP) system [9] for the experiments. The hybriddesign integrates two or more lay-down patterns in the same scaffold unit, whereas the single-design scaffold consists of only one specific laydown pattern. The degraded PCL scaffolds were analyzed by means of differential scanning calorimeter (DSC), thermo gravimetric analyzer (TGA), scanning electron microscope (SEM), and densimeter. The degradation study demonstrated that both single-and hybrid-design PCL scaffolds realized homogeneous hydrolytic degradation via surface erosion resulting in a consistent and predictable mass loss. However, the architectural variation (i.e. single-or hybrid-design) did not inf...
