Design, preparation and properties of online-joints of C/SiC–C/SiC with pins

Effects of Cf/C density on microstructure and properties of 3-D Cf/ZrC composites prepared by liquid metal infiltration

“…However, monolithic ZrC ceramic is very brittle and not practical for many applications [9,10]. Introducing continuous carbon fibers is one of the widely used methods to improve the mechanical properties of ceramic [11][12][13][14][15][16].…”

Microstructure and mechanical properties of SiC bonded joints prepared by CVI

“…It is important to understand the mechanical properties of SiC bonded joints and the C/SiC pin joints as they can both affect the mechanical behavior of C/SiC parts. However, recent studies mainly concentrate on the mechanical behaviors of C/SiC parts or C/SiC pins [10][11][12][13], and the researches on SiC bonded joints are almost untouched.…”

Microstructural characterization and failure analysis of 2D C/SiC two-layer beam with pin-bonded hybrid joints

“…Zhang et al [10] studied the mechanical properties of C/SiC joints with C/SiC pins. Li et al [11,12] studied influences of the diameters and the distributions of pins on the mechanical properties of C/SiC joints. Li et al also studied the damage mode and fracture load of C/SiC joints by finite element analysis and experiment [13].…”

“…However, these joining techniques only involved adhesively bonded joints, and the joining strengths are still not enough to meet the requirement in practical application. Then some mechanical joining techniques have been adopted, such as C/SiC pin joints and C/SiC bolt joints [10][11][12]. To understand the mechanical behavior of these mechanical joining, some research work has also been carried out.…”