Design of parallel-connected polymer tandem solar cells using efficient low bandgap PTB7-Th:PC71BM blend

Towards large area production: stretchability, flexibility, and stability of efficient printed organic tandem solar cells

“…Therefore, the good material is selected (organic and inorganic) for creating ZnO/PTB7-Th, ZnO/P3HT, and ZnO/PCBM interface layers that present a very strong barrier against the ZnO photocatalytic effect under illumination. [47][48][49][50]…”

“…In this computation, all layers are considered as at surfaces, and the optical indices for the materials used are as follows: silver (Ag) from E. D. Palik, 51 zinc oxide (ZnO) from Y. Jiang et al 47 and A. B. Djurisic et al, 52 and the molybdenum oxide (MoO 3 ) from D.-T. Nguyen et al 53 For the organic materials, P3HT:ICBA and PTB7-Th:PCBM, the optical indices were taken from Y. Zang et al, 49 and C.-C. Chen et al 54 7.6. AFM and TEM AFM images were obtained in the air at room temperature with a Nanoscope III, a microscope operating in contact mode.…”

Submicron Organic–Inorganic Hybrid Radiative Cooling Coatings for Stable, Ultrathin, and Lightweight Solar Cells

“…To simulate the performance of our structures, we obtained the material parameters used for the active layers of the USCs from refs , (see Figure S1 in the Supporting Information). The material properties of the other layers have been obtained from refs , − (see Figures S1 and S2 in the Supporting Information), while those of silver and gold have been obtained from Johnson and Christy .…”