Design, manufacture, and experiments of lightweight CFRP hydraulic cylinder tube without metal liner

Abstract

Hydraulic cylinders are widely used in aircraft rudder surface control, landing gear retraction, flaps and speed brakes retraction, ground steering driving, and engine thrust reverser control. The huge weight of hydraulic cylinders severely limits the aircraft's potential for increased range, maneuverability, energy efficiency, and carrying capacity. To achieve the maximum weight reduction, the carbon fiber reinforced polymer (CFRP) hydraulic tube without a metal liner is designed in this paper. In response to the lack of a parameter calculation method for CFRP hydraulic tubes, the accurate calculation method is developed through mechanical modeling and analysis of parameter influence law. For the structure design challenges of connection, sealing, and friction of CFRP hydraulic tube without metal liner, we have proposed and verified the wave contour inlaid structure, three leak‐proof solutions of the connection interface, the leak‐proof structure of the wound CFRP body and the seal friction pair. For the difficulties of multi‐material and high‐precision molding, a new process of split manufacturing‐combined molding is developed to achieve high‐precision and low‐cost manufacturing. Finally, the prototype is manufactured and tested by the presented method, and its weight reduction ratio is 56.64% compared with the original metal hydraulic tube. This study has further matured the application of CFRP hydraulic tubes without metal liners and has great lightweight benefits in aircraft.Highlights CFRP hydraulic tube without metal liner is designed to reduce weight. An accurate calculation method of CFRP parameters is developed. Connection structure, leak‐proof structure, and seal friction pair are designed. The high‐precision and low‐cost molding process is innovatively proposed.