Design and performance evaluation of biogas stove for community cooking application

Biomass Energy

“…Burner orifices for the respective burners can be set such that each burner meters the proper amount of gas to meet combustion stoichiometry. This could require other control measures such as (for simplest control) complete switchovers from pure biogas fuel to the fossil alternative, and modest (a few hours' worth) backup biogas storage, but is otherwise straightforward [7].…”

Biogas Clay Brick Kiln Burner

“…To gain optimum energy and utilize the biogas produced in efficient way for brick firing process bar type of Bolivial was selected Kurchania et al (2010). For complete combustion there are things that are considered to be design in resealable ways.…”

“…The type of burner selected is bar and its length should be the same to the width of brick arrangement, that is 2.115 m. The inner diameter of bar tube as it is stated in the Kurchania et al (2010) could be 19 mm, by selecting 5mm port diameter and 5 mm gap between each port the number of port in one row is: As it is seen in the Fig. 3 the arrangement of ports are, three 211 of ports are arranged on the line with an angle of 1200 difference to each other.…”

“…The diameter of port is quoted in between 2.5-5 mm and the distance between the port should be considered so as to prevent delay of ignition Kurchania et al (2010).…”

“…In this biogas brick firing burner systems, we have selected bar type burner without diffuser. For such burner, the mixing tube must be long enough and approximated as Kurchania et al (2010):…”