Design and Modeling of Viscoelastic Layers for Locomotive Wheel Damping

Abstract

Rail–wheel interaction is one of the most significant and studied aspects of rail vehicle dynamics. The vibrations caused by rail–wheel interaction can become critical when the radial, lateral and longitudinal loads of the vehicle, cargo and passengers are experienced while the vehicle is in motion along winding railroad paths. This mainly causes an excessive production of vibrations that may lead to discomfort for the passengers and shortening of the life span of the vehicle’s body parts. The use of harmonic response analysis (HRA) shows that the wheel experiences high vibrational amplitudes from both radial and lateral excitation. The present study describes a numerical and experimental design procedure that allows mitigation of the locomotive wheel resonance during radial and lateral excitations through viscoelastic layers. It is proven that these high frequencies can be reduced through the proper design of damping layer mechanisms. In particular, three parametric viscoelastic damping layer arrangements were analyzed (on the web of both wheel sides, under the rim of both wheel sides and on the web and under the rim of both wheel sides). The results demonstrate that the correct design and dimensions of these viscoelastic damping layers reduce the high-amplitude resonance peaks of the wheel successfully during both radial and lateral excitation.