Design and implementation of reconfigurable DCT based adaptive PST techniques in OFDM communication system using interleaver encoder

Abstract

Objectives: To propose Reconfigurable Discrete Cosine Transform (RDCT) in Orthogonal Frequency Division Multiplexing (OFDM) high speed communication system to improve efficient spectrum utilization and mitigation of jitter, selective fading effects. The adaptive PTS method reduces Inter-Carrier-Interference (ICI), Inter-Symbol-Interference (ISI), PAPR and the computational intricacy of the communication system. To analyse and compare the performance of proposed Reconfigurable method with existing conventional OFDM communication system. Methods: This proposed technique employs interleaver encoder with both PTS and adaptive PTS with the Reconfigurable Discrete Cosine Transform (RDCT) in OFDM Communication system. Finding: A case study has been carried out and the proposed method is found to be better in CCDF performance, reliability, flexibility and accuracy. To reduce the autocorrelation between every modulated data bit, Forward error Correction in comparison with the conventional OFDM communication system. Novelty: The recent high-speed communication system most commonly using Orthogonal Frequency division multiplexing (OFDM) to enhance the quality of service (QoS) and Bandwidth on demand. Even though the OFDM scheme offers many advantages the signal of OFDM consists of a noise that causes variation in the amplitude resulting in high peak to average power ratio (PAPR) and since OFDM is a multi-carrier system, it is more susceptible to signal drifts. Various methods to reduce the PAPR in OFDM signal are already proposed, in this paper, a technique called interleaver encoder-based Partial Transmit sequence (IEPTS) is reviewed and the new proposed technique employs interleaving encoder utilizing in both PTS and A-PTS with reconfigurable discrete cosine transform (RDCT) in OFDM high-speed communication system.

Comprehensive Review of Optimal Utilization of Clock and Power Resources in Multi Bit Flip Flop Techniques

“…Related Works Optimization Method/Flow (7) , (10) MBFFs Logic optimization (9) MBFFs Pre-placement optimization (8) Register bank placement optimization (11) , (12) , (13) MBFFs post-placement optimization…”

“…In SOC design the dynamic power consumption is dominated and 75% of power is contributed to the total power of the design (2) . Recent researches have introduced many approaches to reduce to switching rate in the clock network such as register placement optimization, buffer sizing [ (3)(4)(5) , register banks (6) , multi-bit flipflops (MBFFs), or applying multi-bit registers (7)(8)(9)(10)(11)(12)(13)(14)(15) . The concept of making a flip-flop of 2 bit from merging -bit flip-flops of two 1 bit is shown in Figure . 1.…”

An efficient hybrid model for cluster head selection to optimize wireless sensor network using simulated annealing algorithm

“…The drawback of this approach is that it creates overload to Cluster heads where huge number of sensors are deployed near to it. The authors in the study (27,28) , have used PSO technique for clustering and communication in the wireless sensor network and it is also been highlighted that the PSO efficiently optimizes the network lifetime of WSN, however the study in (29) shows that PSO technique suffers from a problem called curse of dimensionality. The study in (30) has showed that the Differential Evolution (DE) techniques proves to be the best for clustering among all other conventional methods in WSN (31) , it also states that DE technique is simple, consisting of fewer parameters, reliable and provides the optimum solutions in each run.…”

An efficient hybrid reconfigurable wind gas turbine power management system using MPPT algorithm

“…Where 𝑉 𝑔 is presented generated voltage and 𝐼 𝑔 is described as a generated current. Consider there is no attenuation in system, then the equation ( 6) can be represented as given in (7).…”

“…Nevertheless, when speed of the wind drops lower than the minimum needed a minor gas turbine model is presented as a hold up or a backup source to sustain electricity of a nonstop stream mode [3]- [5]. The power of wind which is maximum is extracted from the wind power system controller and it supplies to the given grid with a worthy quality [6], [7]. A flow controller of power is utilized to maintain the supplied electricity  ISSN: 2088-8694 from both sources of power.…”