Design and Hardware Implementation of an IGBT-Based Half-Bridge Cell for Modular Voltage Source Inverters

Abstract

This article presents the design and hardware implementation of an IGBT-based half-bridge voltage source inverter (VSI) to be used as a basic cell to assemble VSIs of different topologies in modular ways. Herein, we have presented the design methodology and utilized techniques for reducing stray inductances and EMI radiation on the printed circuit board, as well as the way to calculate and select the main electronic components. For the design of the circuit board, local regulations for grid interconnection and international standards were considered in order to obtain a safe and reliable electronic power cell. The developed hardware was subjected to different tests using AC electric motors as loads to validate its design. Two VSIs topologies were evaluated: a single-phase two-level full-bridge inverter and a three-phase two-level inverter. The experimental results validated the theory and demonstrated the excellent performance, reliability, and high efficiency of the developed half-bridge power cell for modular VSIs.

Finite-Control-Set Model Predictive Control for Single-Phase CHB 5-Level Inverter as an Active Power Filter With Discrete-Time FO-PI DC-Link Controller

“…The design and embedding of snubber circuits in the drive circuit has been necessary to suppress the voltage spikes that appear when the IGBTs turnoff. The design, specifications, and laboratory testing of each power cell can be found in [47].…”