Design and fabrication of AlN-on-Si chirped surface acoustic wave resonators for label-free cell detection

Abstract

Chirped surface acoustic wave (SAW) resonators based on aluminum nitride (AlN) thin films have been designed and fabricated to comprehend the wave propagation characteristics induced by interdigitated transducers (IDTs) deposited on their surfaces. From the simulation results, design and geometry of the metal fingers including their width and pitch play critical roles on the wavelength of the acoustic wave and the mechanical displacement, which subsequently set the device resonant frequency. A single-step metal lift-off process involving photolithography and electron beam metal evaporation has been used to pattern and deposit Cr/Au IDT on AlN-on-Si wafers.

Current Development in Interdigital Transducer (IDT) Surface Acoustic Wave Devices for Live Cell In Vitro Studies: A Review

“…The multiple IDT configuration has been explored, such as spiral IDT [22], orthogonal IDT [26], and hexagonal IDT, as illustrated in Figure 12f [101]. The image consists of two different and aligned delay paths, so that acoustic waves can be generated in many directions by properly designing excitation signals.…”