Design and Development of a Low cost, Smart Infusion Pump to deliver Medications for patients Using LabVIEW Interface with Arduino

Abstract

An infusion pump is a medical device that delivers fluids such as nutrients into a patient’s body in controlled amount. They are widely used in clinical settings such as hospitals, nursing homes etc. There are many types of infusion pumps including large volume, patient-controlled analgesia and insulin pumps. Some are designed mainly for stationary use at a patient’s bedside, because infusion pumps are frequently used to administer critical fluids, including high-risk medications, pump failures and can have significant implications for patient’s safety. From 2005 to 2009, FDA received approximately 56,000 reports of adverse events associated with the use of infusion pumps, including numerous injuries and deaths. Some of the problems include software problems, alarm errors, inadequate design, broken components, battery failures, spark, and shock. In order to overcome these problems, our team came up with an idea to rectify. Our project is very compact in size when compared to the ordinary syringe pump. It can be lifted with single hand since it is weightless and the components used in our project are reliable, cost efficient and user friendly.

Review of Design and Implementation of Automated Drugs Mixer

“…By discussing the previous research that was approved in the related work and the most important problems that were found to be solved in the design of the syringe infusion pump device, for example [19] the knowledge of the presence of bubbles and the level of treatment in the syringe was overcome by placing a bubble sensor and an IR sensor with the help of connecting the Arduino with the LabVIEW as showed in Fig. 2.…”

“…Sakthivel Sankaran et al [19]. proposed a study to describe a method for infusing the medicine consistently into the patient.…”

Working Principle and Intelligence of Smart Infusion Pump

“…Because delivering the drug to the patient is so crucial, the infusion pump's components must be meticulously managed and observed. (Govindaraj, 2019) Literature Review: Intravenous (IV) drug mistakes are frequent and may be quite dangerous in hospitals. The FDA has been informed of several hundred IV pumprelated occurrences over the last 20 years, some of which have resulted in patient fatalities.…”