Design and Comparison of Performance of DFIG Based Wind Turbine with PID Controller, Fuzzy Controller, Artificial Neural Network and Model Predictive Controller

Abstract

The everyday benefits of environmentally friendly power sources urges to build their use to the bigger degree of which wind energy is the most accessible asset. This paper presents the plan of multimode hang control methodology based variable speed wind power age framework. The multimode hang control procedure improves the framework to work regarding the network framework and furthermore in the independent method of activity. The multimode control methodology utilizes the DC connect voltage regulator to control the DC interface capacitor voltage for working the framework side converter and current regulator to control current and force of the rotor side converter. The control methodology is investigated with the customary regulator like PI regulator, astute regulators like Fuzzy regulator, fake neural organization (ANN) and model prescient regulator (MPC) which predicts the future factors. A correlation has been performed with the previously mentioned various sorts of regulators based breeze power age framework regarding various boundaries. This paper likewise includes examination of various experiments with the previously mentioned regulators. The examination of various experiments with various regulators has been performed utilizing MATLAB 2013a and every one of the outcomes are checked.

Monitoring and control of single-phase electrical systems using IoT based microcontrollers

“…The Figure 8 describes the state of the system, in which the system sends the values of parameters (voltage, current, temperature and frequency) to the end user when it receives input command 'STATE' from user. Since, in this condition all parameters are below threshold and the system is turned ON which is indicated by the status of the lamp [26], [27]. The system is turned off when it receives input from the user in manual mode of operation, because when the system is operated in 'AUTO MODE' it does not require any input from the user to turn ON and OFF the system.…”