Design and analysis of a hydro-powered water turbine pump: a sustainable irrigation infrastructure

Abstract

The agriculture sector of Nepal has been plagued by problems of poor irrigation networks and infrastructure. This has forced farmers to use fuel and electricity-based pumps, which are both expensive and unsustainable. The problems related to the distribution of power and fluctuating voltages add to the ineffectiveness of the electrical pumping system. So, as a better alternative for environment-friendly and inexpensive irrigation infrastructure, this paper proposes a design methodology of a community-operated hydro-powered pump called water turbine pump (WTP). Although introduced in the 1920s, this technology has been largely ignored nowadays. Moreover, there are insufficient literature and technical documentation to support the design decisions for developers. With an objective to induce momentum in the research and development of this technology, this work presents a well-defined methodology to design a WTP using a propeller turbine directly coupled with a centrifugal pump, in reference to a site located in Bardiya, Nepal. The WTP designed using this methodology could utilize a head of 3 m and a flow rate of 150 lps to deliver 14 lps of water to a height of 14.9 m, yielding a head ratio of 1:5, with an overall efficiency of 50.5%.

Experimental study of small hydro turbine propeller performance with a variety of blade angles of attack

“…The propeller turbine is a hydro-turbine suitable for low heads such as irrigation canals and rivers [13]. The efficiency of the power generated by the propeller turbine is about 40 -60% of the input power used to drive the turbine [14] [15].…”