Design and Analysis of a Base Bleed Unit for the Drag Reduction of a High-Power Rocket Operating at Transonic Speeds

Abstract

In the present study, a passive flow device is considered for drag reduction purposes through implementation in a transonic high-power rocket. The high-power rocket serves as a reference platform that, apart from the operating conditions, enforces several constraints in terms of available volume and placement locations. A step-by-step methodology is suggested, where the unit is initially broken down into an inlet and an outlet component. The flow field is investigated by means of computational modeling (CFD), where the Reynolds-averaged Navier–Stokes equations are solved coupled with turbulence models that vary depending on the design phase and the individual component. In the first design phase, the best alternative configuration is selected for each component by comparing mass flow rates and discharge coefficients. In the second design phase, each component is analyzed in greater detail based on the first phase results. Indicatively, the protruding inlet diffuser-type channel is converted into a protruding inlet nozzle-type channel to avoid choked flow phenomena, and a nozzle geometry is selected as the outlet amongst the other considered scenarios. The two components are eventually integrated into a common base bleed unit and a final assessment is made. The computational results are used to predict the performance and trajectory of the rocket through a well-established trajectory software. The overall methodology is validated against full-scale test flight data. The results show that the base bleed unit developed in the framework of this study yields a drag reduction of approximately 15% at transonic speeds without impacting the rocket mass and stability.