Recebido em 4/3/05; aceito em 18/5/05; publicado na web em 8/9/05 THE USE OF CENTRIFUGED SLUDGE FROM A WATER TREATMENT PLANT (WTP) IN PORTLAND CEMENT CONCRETE MATRICES FOR REDUCINGTHE ENVIRONMENTAL IMPACT. An alternative application of the humid sludge from the Passaúna WTP, located in Curitiba's metropolitan area, is proposed for concrete structures, partially replacing aggregates and cement. For the investigation, a reference concrete and four concrete mixtures with sludge were produced, and from these, two mixtures, containing 4% and 8% of sludge (m/m), were analyzed by different techniques: X ray fluorescence, X ray diffraction, thermogravimetric analysis, physicochemical analysis, compressive strength, etc. The properties were evaluated and the results indicate that the mixtures can be applied in different situations as cast structures for construction of concrete walls. Mixtures with more than 4% of sludge are restricted to applications where the workability of the concrete is not required, such as for residential pavements, sidewalks and stepping floors.Keywords: concrete; disposal; WTP sludge.
INTRODUÇÃOA demanda por água potável e a má qualidade da água dos rios está exigindo maiores concentrações de produtos químicos nas Estações de Tratamento de Água (ETAs), gerando maior quantidade de resíduos, denominados lodos de ETA.Há muito tempo o destino deste material vinha sendo os cursos d'água próximo às estações. No entanto, as atuais legislações estão restringindo e, até mesmo, proibindo esta prática. Segundo a NBR 10.004/87 1 e a Lei Estadual 12.493/99 2 estes lodos, classificados como resíduos sólidos, devem ser minimizados, reutilizados e/ou reciclados, ficando proibido seu lançamento em corpos d'água.Para transformar a água bruta em potável, as ETAs utilizam processos como coagulação, floculação, decantação e filtração dos resí-duos, os quais são, normalmente, constituídos de partículas coloidais de natureza química, física e/ou biológica 3,4 . De acordo com Richter 5 , o lodo de ETA é considerado como um resíduo composto de água e sólidos suspensos contidos na própria água, acrescidos dos produtos químicos aplicados durante o processo de seu tratamento. Grandin et al. 6 complementam essa constituição com resíduos sólidos orgâ-nicos e inorgânicos provenientes da água bruta, tais como algas, bactérias, vírus, partículas orgânicas em suspensão, colóides, areias, argila, siltes, cálcio, magnésio, ferro, manganês, etc. Outros metais pesados podem fazer parte dos sedimentos em águas fluviais devido a poluentes arrastados pelo deflúvio superficial urbano ou mesmo por despejos de efluentes industriais nos mananciais que alimentam as estações de tratamento 7 . A quantidade de lodo é dependente da qualidade físico-quími-ca das águas bruta e tratada e dos coagulantes e produtos utilizados no processo de sua potabilização. Desta forma, o volume gerado passa a ser diretamente proporcional à dosagem de coagulante utilizado no processo, o qual varia entre 0,2 e 5% do volume total de água tratada pela ETA 5 . A iden...