Delamination buckling of cylindrical shells under axial compression

Efficient modelling of delamination buckling in composite cylindrical shells under axial compression

“…Simitses et al [19][20] analytically predicted delamination buckling of cylindrical shells and panels. The load cases considered in their study were uniform axial compression and uniform external pressure, applied individually.…”

“…Due to its mathematical complexity and modelling, very limited information on the subject of delamination buckling of cylindrical shells and panels is currently available [19][20][21][22][23][24]. This paper studies the effect of delamination on the global load-carrying capacity of isotropic and laminated cylindrical shells under axial compressive load.…”

Delamination buckling and postbuckling in composite cylindrical shells under combined axial compression and external pressure

“…Therefore, an efficient modelling approach was employed for the investigation of the buckling and postbuckling behaviour of these structures. In each case the results were compared with the corresponding results obtained by Simitses et al [25][26][27]. It is shown that ignoring the contact between the delaminated layers could result in wrong estimations of the critical buckling loads in cylindrical shells under axial compression or external pressure.…”

“…The most comprehensive analytical study is by Simitses et al [25][26][27]. Simitses et al [25][26][27] analytically predicted delamination buckling of cylindrical shells and panels. The load cases considered in their study were uniform axial compression and uniform external pressure, applied individually.…”

“…[17][18][19][20][21][22][23]. Due to its mathematical complexity and modelling, very limited information on the subject of delamination buckling of cylindrical shells and panels is currently available [3][4][24][25][26][27][28][29][30][31][32][33]. The most comprehensive analytical study is by Simitses et al [25][26][27].…”