Degradation of caffeine by photo-Fenton process: Optimization of treatment conditions using experimental design

Abstract

The degradation of caffeine in different kind of effluents, via photo-Fenton process, was investigated in lab-scale and in a solar pilot plant. The treatment conditions (caffeine, Fe(2+) and H(2)O(2) concentrations) were defined by experimental design. The optimized conditions for each variable, obtained using the response factor (% mineralization), were: 52.0 mg L(-1)caffeine, 10.0 mg L(-1)Fe(2+) and 42.0 mg L(-1)H(2)O(2) (replaced in kinetic experiments). Under these conditions, in ultrapure water (UW), the caffeine concentration reached the quantitation limit (0.76 mg L(-1)) after 20 min, and 78% of mineralization was obtained respectively after 120 min of reaction. Using the same conditions, the matrix influence (surface water - SW and sewage treatment plant effluent - STP) on caffeine degradation was also evaluated. The total removal of caffeine in SW was reached at the same time in UW (after 20 min), while 40 min were necessary in STP. Although lower mineralization rates were verified for high organic load, under the same operational conditions, less H(2)O(2) was necessary to mineralize the dissolved organic carbon as the initial organic load increases. A high efficiency of the photo-Fenton process was also observed in caffeine degradation by solar photocatalysis using a CPC reactor, as well as intermediates of low toxicity, demonstrating that photo-Fenton process can be a viable alternative for caffeine removal in wastewater.

Remoção de Cafeína por Adsorção em Carvão Ativado

“…Assim, a entrada no meio ambiente ocorre de forma contínua. Entre estes compostos, a cafeína é uma das drogas lícitas mais utilizadas em todo o mundo, estando presente em alimentos, bebidas e medicamentos [6,7,8,9].…”

Degradation of the herbicide paraquat by photo-fenton process: optimization by experimental design and toxicity assessment

“…The ranges of the variables were chosen according to previous studies. [27][28][29][30] For CCD, the equations used to quantitatively describe each system and draw the response surface and contour plots were built using STATISTICA 6.0 software. Statistical validation was obtained using the analysis of variance (ANOVA) test at 95% confidence level.…”

Utilização de processo Foto-Fenton no tratamento de águas contendo Benzeno-Tolueno-Xileno (BTX’s)

“…A Tabela 3 a seguir mostra os valores de degradação da solução de BTX's em função dos fatores e níveis estipulados. A melhor condição experimental foi velada pelo experimento 3 de acordo com os fatores: pH, concentração de peróxido de hidrogênio, concentração de íons e número de lâmpadas utilizadas com seus respectivos níveis: 2, 1,5 gL Trovó et al, (2013);Veloutsou, S Bizani, E Fytianos (2014). Para valores de pH elevados ou acimas de 3, pode ocorrer a precipitação dos íons de ferro presentes em solução, diminuído assim o efeito da formação de radicais hidroxilas presentes e consequentemente diminuindo a eficiência na degradação dos compostos orgânicos presentes.…”